Appendix
Specifications
Video input
Number/signal type | 1 RGBS, RGBcvS |
| 1 component video (Y, |
| 1 SDI (optional) |
| 1 |
| 1 composite video |
Connectors | 1 |
| 3 BNC female (component video, |
| 1 BNC female (optional SDI) |
| 1 |
| 1 BNC female (composite video) |
Minimum/maximum levels | Analog 0.0V to 1.0V |
Impedance | 75 ohms |
Horizontal frequency | 15.6 kHz to 17.75 kHz |
Vertical frequency | 50 Hz to 60 Hz |
Return loss |
Video processing
Decoder | 9 bit digital |
Digital sampling | 24 bit, 8 bits per color; 13.5 MHz standard |
Colors | 16.78 million |
Video output
Number/signal type | 2 decoded RGBHV, RGBS, RGsB, or component video |
Connectors | 6 BNC female, 1 |
Minimum/maximum levels | 0.0V to 0.7V |
Impedance | 75 ohms |
Vertical frequency | 50 Hz to 60 Hz |
Sync
Input type | RGBS, RGBcvS | |
Output type | RGBHV, RGBS, RGsB, component video | |
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | |
Input level | RGB, 0V to 5.0V | |
| RGBcvS, 0V to 1.0V | |
Output level | TTL | 5.0V |
Input impedance | 75 ohms |
|
Output impedance | 75 ohms |
|
Max input voltage | 5.0V |
|
Max. propagation delay | 20 ns |
|
Polarity | Positive or negative |
Control/remote — decoder
Serial control port | |
Baud rate and protocol | 9600, |
Serial control pin configurations | 1 = input 1 select, 2 = TX, 3 = RX, 4 = input 2 select, 5 = GND, 6 = input 3 |
| select, |
| 7 = input 4 select |
Contact closure | |
Contact closure pin configurations | See pins 1, 4, 6, and 7 above. |
IR controller module | IR 901 |