Extron electronic SW12 VGA ARS, SW8 VGA Ars manual Extron’s firmware loader screen

Page 34

9. On the Choose Firmware File window, double-click on the new firmware file to open it. The Choose Firmware File window closes, and the path to the selected firmware file is displayed in the “Select a firmware file” field on the firmware file selection screen.

Figure 3-7 — Extron’s firmware loader screen

10. Click the Upload button. A status bar, which shows the progress of the upload, appears in the Firmware Loader window. The firmware upload to the switcher may take several minutes. Once the status bar has progressed fully from left to right, the firmware loader utility resets the switcher.

In addition, messages appear on the firmware file selection window indicating when the unit is uploading the firmware, then resetting itself.

When the firmware upload process is completed, the message “Transfer Complete!” is displayed, and the new firmware version number appears in the Current Unit Information field.

11. Click Exit to close the Firmware Loader.

SW8/12 VGA Ars • Control 3-9

Image 34

Contents Computer Video and Audio Switchers SW8/12 VGA ArsConsignes de Sécurité Français PrecautionsSafety Instructions English Sicherheitsanleitungen DeutschFCC Class a Notice Quick Start SW8/12 VGA Ars SW8/12 VGA Ars Quick Start QS-1Quick Start SW8/12 VGA Ars, cont’d QS-2 SW8/12 VGA Ars Quick StartTable of Contents Table of Contents, cont’d One About This Manual About the SW8/12 VGA Ars SwitchersIntroduction SW8/12 VGA Ars IntroductionFeatures Introduction, cont’d Two Desktop placement Installation and OperationMounting the SW8/12 VGA Ars Switcher Rack mountingMounting instructions Rack mount an SW8/12 VGA Ars unit as followsInstallation and Operation, cont’d Mounting under a desktopMounting through a desktop Cut an appropriately sized hole in the desktopRear Panel UXGA, QXGA, or HdtvCable Connections Power connectionComputer video input connections Audio input connections Pin Name Connection 5mm Stereo ConnectorVideo output connections Remote control connection Audio output connections10 SW8/12 VGA Ars Installation and Operation VSW I AAP connection15 a typical switcher application w/VSW I AAP units IR 102 remote control connection 12 SW8/12 VGA Ars Installation and OperationFront Panel Hold Press Description and ResultOperating the SW8/12 VGA Ars Switchers 14 SW8/12 VGA Ars Installation and OperationThree Pin RS-232 Description RS-232 Control Port Connector Remote Control via Simple Instruction Set SIS\⤀Switcher-initiated unsolicited\⤀ messages ControlUsing the command/response table Error responsesTimeout Symbol definitionsCommand/Response Table for SIS commands Command Ascii Telnet Response Additional descriptionUpload firmware Updating Firmware Downloading the firmwareLoading the firmware to the switcher \Program Files\Extron\FWLoaderExtron firmware loader screen Extron’s firmware loader screen 10 SW8/12 VGA Ars Control Specifications, Part Numbers, Accessories Specifications Specifications, Part Numbers, AccessoriesSW8/12 VGA Ars Specifications, Part Numbers, Accessories Audio input Accessories Part Numbers and AccessoriesSW8/12 VGA Ars switchers Included partsExtron’s Warranty Extron Electronics, Europe Beeldschermweg 6C

Related manuals

Manual 41 pages 19.76 Kb