Extron electronic TPS150 Installationstallation, cont’d, Mounting the Transmitter and Receiver

Installationstallation, cont’d

Mounting the Transmitter and Receiver

The TPS150 comes with rubber feet for the transmitter and receiver, a set of MTR102 rack ears for the transmitter, and a set mounting brackets for the receiver.

Rack mounting the transmitter

If desired, rack mount the transmitter as follows:

1.	Remove the rubber feet from the bottom of the transmitter.
2.	Attach the 992546-2 rack mounting ears to the transmitter with the six
	provided #8 machine screws (figure 2-1).
3.	Insert the transmitter into the rack, aligning the holes in the mounting bracket
	with those of the rack.

#8 Screw (6 Plcs) Each Side

POW ER

MU TE

VOLU ME

CTO	R
OJE ER
PRPOW

BLA NK

4

			3
2
1
		LEC	T
	T SE
INPU

itter sm

Tran r Pai

/ Tw	isted
her
Switc
0 A/V

TPT15

Figure 2-1 — Mounting the transmitter

4. Secure the transmitter to the rack using the supplied machine screws.

Projector mounting the receiver

If desired, projector mount the receiver as follows:

1.	Remove the rubber feet from the bottom of the receiver.
2.	Attach the supplied 992547-2 projector pole mounting brackets to the receiver
	with the four provided #8 machine screws (figure 2-2).

2-2 TPS150 Switching and Transmission System • Installation