Extron electronic TPS150 manual Operationeration, cont’d, Controls and Indicators

Page 20

Operationeration, cont’d

Controls and Indicators

Transmitter controls and indicators

The TPT150 transmitter will not operate properly unless it is connected to a powered TPR150 receiver.

All of the transmitter’s controls are on the front panel (figure 3-1).

7

 

 

 

7

 

 

5

 

1

2

3

4

BLANK

PROJECTOR

 

MUTE

POWER

POWER

VOLUME

INPUT SELECT

TPT150 A/V Switcher / Twisted Pair Transmitter

2

3

4

6

1

Figure 3-1 — TPT150 transmitter front panel

1Power LED — When lit, the Power LED indicates that power is applied to the transmitter.

2

3

Input Select buttons — The Input 1 Select through Input 4 Select buttons select the associated video and audio input. The selected video input is transmitted to the receiver. The selected audio input is output locally.

If a user-specified serial command is set for an Input Select button, the transmitter also sends that serial command to the receiver when the button is pressed. The receiver, in turn, issues the command to the projector. See chapter 4, Serial Communications, to specify the command to be sent.

The Input Select buttons are also used in conjunction with the Volume buttons ( 5 ) to adjust each input’s audio level. See Volume adjustment on page 3-5 for more details.

Blank button and LED — Press the Blank button to toggle video mute on and off. When the output is blanked, no video is transmitted to the receiver, which, in turn, outputs a blank image. The video mute function mutes the video signals only; the sync signal(s) are still active. The Blank LED lights to indicate that the video is blanked.

4Projector Power button and LED — Press the Projector Power button to transmit one of two user-specified serial commands to the receiver, which then issues the command to a device such as a projector. See chapter 4, Serial Communications, to specify the command(s) to be sent.

The Projector Power LED lights green when the power on command is the most recent command transmission and is unlit when the power off command is the most recent transmission.

If a projector power on (warm-up) delay or projector power off (cool-down) is programmed (see chapter 4, Serial Communications), the Projector Power LED blinks while that delay times out. All front panel operations are disabled during the delay.

Some projectors use the same command for power on and power off. If the same code is specified for on and off, the Projector Power LED blinks for each button push.

3-2 TPS150 Switching and Transmission System • Operation

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Twisted Pair A/V Switching and Transmission System TPS150Safety Instructions English Consignes de Sécurité FrançaisSicherheitsanleitungen Deutsch Instrucciones de seguridad EspañolInputs 3 TPS150 Switching and Transmission System Quick Start QS-1Inputs 1 and 2 Connect Quick Start TPS150 Switching and Transmission System Volume and buttonsQS-2 TPS150 Switching and Transmission System Quick Start Output 1 Connect aTable of Contents Table of Contents, cont’d One About the TPT150 switching transmitter TPS150 Switching and Transmission System IntroductionIntroductiontroduction, cont’d About this ManualAbout the TPR150 receiver Serial RS-232 commands on one male DB9 connectorTP Cable Advantages Features Introduction, cont’dTransmission distance Video format Maximum rangeTPS150 Switching and Transmission System Introduction Introduction, cont’d Two Installationstallation, cont’d TPS150 Switching and Transmission System InstallationMounting the Transmitter and Receiver Rack mounting the transmitterVideo and audio input connections Cabling and Rear Panel ViewsTransmitter connections Installation, cont’d TP and audio output connectionsRemote control connections Power connectionReceiver connections TP input connectionSerial connection TP Cable TerminationVideo output connections Three Controls and Indicators Transmitter controls and indicatorsTPS150 Switching and Transmission System Operation Operationeration, cont’dReceiver controls and indicators TPR150 receiver front panelPower Projector powerOperation, cont’d OperationsVolume adjustment Full system resetReceiver reset Output volumeOptimizing the Video Troubleshooting General checksSpecific problems Problem Possible cause Solution No image appearsDistorted image AppearsFour Installing the software SerialCommunicationsunications, cont’dICS100 Windows-Based Control Program System requirementsEstablishing communications with the program ICS100 program window and connected messageSerial Communications, cont’d AgainConnected window Using the software to configure the serial port settings Using the software to program the input and projector codes For each input or projector code to be programmedCode entry Ascii code Using the software to operate the transmission system Window appears figureUsing the help system Button mutes and unmutes the audio outputSerial Commands Command and response structureCommunication protocols Addressing the transmitterUsing the command/response table SymbolsR0addressecho of the command sent R1addressecho of the command sentSpaces between bytes are not allowed Command Ascii Command Response Additional description AddressingInput audio level Command Response Additional descriptionFront panel lockout Serial Communications, cont’d AAppendix a Specifications Reference InformationAudio TPT150 only Reference Information, cont’d GeneralOptional accessories Accessory Part numberPart Numbers Included partsReference Information, cont’d FCC Class a Notice Extron’s Warranty Asia JapanExtron Electronics, USA
Related manuals
Manual 54 pages 58.58 Kb

TPS150 specifications

The Extron TPS150 is a highly regarded touch panel system designed for professional AV environments, providing an intuitive interface for controlling various audio and video components. This device is part of Extron's popular TouchLink Pro series, which is known for its robustness and versatility in managing classroom and conference room technology.

One of the standout features of the TPS150 is its high-resolution capacitive touch screen, which measures at 15 inches. This screen delivers vibrant colors and exceptional clarity, ensuring that users can easily interact with the device even in well-lit environments. The touch panel's interface is fully customizable, allowing users to create a layout tailored to their specific needs. This customization can include the addition of buttons, sliders, and dynamic graphics that make navigation seamless and user-friendly.

In terms of connectivity, the TPS150 supports Ethernet communication, which enables easy integration with networked AV systems. This feature allows for remote access and control, making it easier for IT professionals to monitor and manage AV devices from a centralized location. Additionally, the TPS150 is compatible with various Extron control systems, providing a robust platform for managing complex multimedia setups.

The device also incorporates advanced security features, ensuring that sensitive system controls are protected from unauthorized access. Administrators can establish user permissions and authentication processes to maintain control over the AV environment, which is particularly important in corporate and educational settings.

Moreover, the TPS150 supports Extron's global configurator software, which simplifies the setup process and allows for easy programming of touch panel interfaces. Users can design custom layouts quickly and efficiently, and the software also provides an extensive library of drivers for popular AV equipment, enhancing compatibility and functionality.

With its elegant design, high-quality components, and customizable interface, the Extron TPS150 touch panel offers an effective solution for AV control. Whether used in educational, corporate, or professional environments, it empowers users to streamline their audiovisual experiences and maintain effective control over their technology, ensuring successful presentations and meetings.
Top Page Image Contents