Extron electronic TPS150 manual Installation, cont’d, TP and audio output connections

Page 16

Installation, cont’d

Connect the various video formats as shown in figure 2-4.

Component video

 

INPUT 3

 

INPUT 3

S-video

 

 

 

 

VIDEO

R-Y

VIDEO

 

R-Y

S-VIDEO

 

S-VIDEO

 

 

Y

B-Y

Y

 

B-Y

Composite video

INPUT 3

VIDEO

R-Y

S-VIDEO

Y

B-Y

Figure 2-4 — Input 3 and input 4 video format connections

4Input audio connectors — Connect unbalanced stereo or mono audio sources to these pairs (left and right) of RCA connectors for audio input.

TP and audio output connections

5TP connector — Connect one end of an STP or FTP cable to this RJ-45 female connector on the transmitter.

Connect the free end of the same TP cable from the transmitter to the RJ-45 female connector on the receiver.

See TP cable termination, on page 2-6, to properly wire the RJ-45 connector.

Extron recommends the use of STP or FTP cable only.

6Audio connector — Connect an audio device, such as powered speakers, to this 3.8 mm, 5-pole captive screw connector for balanced or unbalanced audio output.

Figure 2-5 shows how to wire the captive screw audio connector. The connector is included with the transmitter, but you must obtain the cable. Insert the wires into the appropriate openings in the captive screw connector. Tighten the screws on top to fasten the wires.

CAUTION

Wiring the audio incorrectly can damage the audio output circuits.

Connect the sleeve(s) to ground (GND). Connecting the sleeve(s) to a negative (-) terminal will damage audio output circuits.

Tip

See caution

Sleeve(s)

Tip

See caution

Unbalanced Output

Tip

L

Ring

 

Sleeve (s)

Tip

Ring

Balanced Output

Figure 2-5 — Wiring the audio output connector

The audio output always follows the video switch.

2-4 TPS150 Switching and Transmission System Installation

Image 16
Contents Twisted Pair A/V Switching and Transmission System TPS150Safety Instructions English Consignes de Sécurité FrançaisSicherheitsanleitungen Deutsch Instrucciones de seguridad EspañolInputs 1 and 2 Connect TPS150 Switching and Transmission System Quick Start QS-1Inputs 3 Quick Start TPS150 Switching and Transmission System Volume and buttonsQS-2 TPS150 Switching and Transmission System Quick Start Output 1 Connect aTable of Contents Table of Contents, cont’d One About the TPT150 switching transmitter TPS150 Switching and Transmission System IntroductionIntroductiontroduction, cont’d About this ManualTP Cable Advantages Serial RS-232 commands on one male DB9 connectorAbout the TPR150 receiver Features Introduction, cont’dTransmission distance Video format Maximum rangeTPS150 Switching and Transmission System Introduction Introduction, cont’d Two Installationstallation, cont’d TPS150 Switching and Transmission System InstallationMounting the Transmitter and Receiver Rack mounting the transmitterTransmitter connections Cabling and Rear Panel ViewsVideo and audio input connections Installation, cont’d TP and audio output connectionsRemote control connections Power connectionReceiver connections TP input connectionVideo output connections TP Cable TerminationSerial connection Three Controls and Indicators Transmitter controls and indicatorsTPS150 Switching and Transmission System Operation Operationeration, cont’dReceiver controls and indicators TPR150 receiver front panelPower Projector powerOperation, cont’d OperationsVolume adjustment Full system resetReceiver reset Output volumeOptimizing the Video Troubleshooting General checksSpecific problems Problem Possible cause Solution No image appearsDistorted image AppearsFour Installing the software SerialCommunicationsunications, cont’dICS100 Windows-Based Control Program System requirementsEstablishing communications with the program ICS100 program window and connected messageSerial Communications, cont’d AgainConnected window Using the software to configure the serial port settings Using the software to program the input and projector codes For each input or projector code to be programmedCode entry Ascii code Using the software to operate the transmission system Window appears figureUsing the help system Button mutes and unmutes the audio outputSerial Commands Command and response structureCommunication protocols Addressing the transmitterUsing the command/response table SymbolsR0addressecho of the command sent R1addressecho of the command sentSpaces between bytes are not allowed Command Ascii Command Response Additional description AddressingInput audio level Command Response Additional descriptionFront panel lockout Serial Communications, cont’d AAppendix a Specifications Reference InformationAudio TPT150 only Reference Information, cont’d GeneralOptional accessories Accessory Part numberPart Numbers Included partsReference Information, cont’d FCC Class a Notice Extron’s Warranty Asia JapanExtron Electronics, USA
Related manuals
Manual 54 pages 58.58 Kb

TPS150 specifications

The Extron TPS150 is a highly regarded touch panel system designed for professional AV environments, providing an intuitive interface for controlling various audio and video components. This device is part of Extron's popular TouchLink Pro series, which is known for its robustness and versatility in managing classroom and conference room technology.

One of the standout features of the TPS150 is its high-resolution capacitive touch screen, which measures at 15 inches. This screen delivers vibrant colors and exceptional clarity, ensuring that users can easily interact with the device even in well-lit environments. The touch panel's interface is fully customizable, allowing users to create a layout tailored to their specific needs. This customization can include the addition of buttons, sliders, and dynamic graphics that make navigation seamless and user-friendly.

In terms of connectivity, the TPS150 supports Ethernet communication, which enables easy integration with networked AV systems. This feature allows for remote access and control, making it easier for IT professionals to monitor and manage AV devices from a centralized location. Additionally, the TPS150 is compatible with various Extron control systems, providing a robust platform for managing complex multimedia setups.

The device also incorporates advanced security features, ensuring that sensitive system controls are protected from unauthorized access. Administrators can establish user permissions and authentication processes to maintain control over the AV environment, which is particularly important in corporate and educational settings.

Moreover, the TPS150 supports Extron's global configurator software, which simplifies the setup process and allows for easy programming of touch panel interfaces. Users can design custom layouts quickly and efficiently, and the software also provides an extensive library of drivers for popular AV equipment, enhancing compatibility and functionality.

With its elegant design, high-quality components, and customizable interface, the Extron TPS150 touch panel offers an effective solution for AV control. Whether used in educational, corporate, or professional environments, it empowers users to streamline their audiovisual experiences and maintain effective control over their technology, ensuring successful presentations and meetings.