Extron electronic GSS 100 user manual Command/Response Table for IP SIS Commands

SIS™ Control, cont’d

Command/Response Table for IP SIS Commands

Symbol Definitions
X3! = Device name	(Up to 240 characters)

NThe following characters are invalid in the name: {space} ~ , @ = , ‘ [ ] { } < > ’ “ ;

: \ and ?.

X3! = Default name	“GSS-100-”+ last 3 pairs of MAC address
X3@ = Time and date (set)		MM/DD/YY•HH:MM:SS where:
		MM = month: 01 (Jan) through 12 (Dec)
		DD = day: 01 through 31
		YY = year: 00 through 99
		HH = hour: 00 through 24
		MM = minutes: 00 through 59
X3# = Time and date (read)		SS = seconds: 00 through 59
		In the format: Day,•DD•Mmm•YYYY•HH:MM:SS
where:
		Day = weekday: Mon through Sun
		DD = day: 01 through 31
		Mmm = month: Jan through Dec
		YYYY = year: 2000 through 2099
		HH = hour: 00 through 24
		MM = minutes: 00 through 59
X3$ = GMT offset		SS = seconds: 00 through 59
	–12.0 through +14.0. Hours and minutes removed from GMT
X3% = Daylight Savings Time		0 = Daylight Savings Time off/ignore
		1 = Daylight Savings Time on
		(northern hemisphere)
		2 = Daylight Savings Time on (Europe)
		3 = Daylight Savings Time on (Brazil)
X3^ = IP address	###.###.###.###
X3& = Hardware (MAC) address		##-##-##-##-##-##
X3* = # of open connections		0 - 255
X3( = Password	12 digits, alphanumeric

NThe following characters are invalid in passwords: {space} + ~ , @ = ‘ [ ] { } < > ’ “

; : \ and ?.

X4)	= DHCP	(0 = off, 1 = on)
X4! = Port #		00 – 99 (00 = all ports)
X4@ = Baud rate		300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 14400, 19200,
X4# = Parity		28800, 38400, 57600, 115200
		Odd, even, none, mark, space (only the first letter required)
X4$ = Data bits		7, 8
X4% = Stop bits		1, 2
X4^ = Verbose mode		0	= Clear/none (default for Telnet connection)
		1	= Verbose mode (default for RS-232 connection)
		2	= Tagged responses for queries
		3	= Verbose mode and tagged for queries

NIf tagged responses is enabled, all read commands return the constant string and

the value, the same as the set command does (for example, the read matrix name command, ECN}, returns Ipn•X1%]).

X4& = Domain name Standard domain name conventions apply (for example, xxx.com)

NThe following characters are invalid in a domain name: {space} + ~ , = ‘ [ ] { } < >

’ “ ; : \ and ?. The @ character is only acceptable as the lead-in to the domain name (such as @extron.com).

X4*	= E-mail event number	1 – 64
X4( = E-mail address		Typical e-mail address format (for example:
X5)		nnnnn@xxx.com)
	= E-mail filename	yyyyyyy.eml

4-16 GSS 100 Graphic Still Store • SIS™ Control GSS 100 Graphic Still Store • SIS™ Control 4-17