Cables to Go KNV104D, KNV108D Scan Rate, Keyboard Speed, Hotkey Menu, CH Display, Position

Page 10
Scan Rate

computers.

The non-volatile memory stores the Scan Type setting.

Scan Rate

Sets the duration of a computer displayed in Auto Scan mode. The options are 3 seconds, 8 seconds, 15 seconds and 30 seconds. The non-volatile memory stores the Scan Rate setting.

Keyboard Speed

The KVM Switch offers keyboard typematic setting that overrides the similar settings in BIOS and in Windows. Available speed options are Low, Middle, Fast and Faster as 10, 15, 20 and 30 characters/sec respectively.

The non-volatile memory stores the Keyboard Speed setting.

Hotkey Menu

When you hit the left <CTRL> key twice within two seconds, the "Hotkey Menu" appears displaying a list of hot-key commands if the option is On. The 'Hotkey Menu' can be turned Off if you prefer not to see it when the left <CTRL> key is hit twice.

The non-volatile memory stores the Hotkey Menu setting.

CH Display

Auto Off: After you select a computer, the port address and name of the computer will appear on the screen for 3 seconds then disappear automatically.

Always On: The port address and name of a selected computer and/or OSD status displayed on the screen all the time.

The non-volatile memory stores the CH Display setting.

Position

The position of the selected computer name and/or OSD status displayed on screen during operation. The actual display position shifts due to different VGA resolution, the higher the resolution the higher the display position. The non-volatile memory stores the Position setting.

18

UL as Upper Left, UR as Upper Right,

LLas Lower Left, LR as Lower Right. MI as MIddle,

ESC: To exit the OSD, press the <ESCAPE> key.

19

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Introduction One-Console KVM SwitchesTwo-Console KVM Switches OverviewMore features for multi-access models FeaturesExtra features for On-Screen Display model Automatic Mouse ConversionCascade Master/Slave Configuration ConfigurationsSingle KVM Switch Configuration Figure 1 A single KVM Switch configurationDevice Connection InstallationFigure 3 Master console connection Adhesive Rubber Foot Initial Power-UpReplace Master Console Devices Figure 4 Master computer connectionFigure 6 Attaching rack mount bracket Optional Rack Mount AccessoriesFigure 7 Assembling rack cable support Front Panel Push Buttons Multimedia ModuleOperation K/M RESETKNV104D,KNV108D,KNV116D,KNV2108D,KNV2116D OSD On-Screen-Display OperationFigure 9 OSD screen illustration Manual Scan Ready PC In Scan mode, scan through power-onAuto Scan Audio StickHotkey Menu Scan RateKeyboard Speed CH DisplayHot-key commands Figure 11 Cascaded 4-port KVM Switches Cascade ConfigurationConnection Figure 12 Cascaded 8-port KVM SwitchesConnections Multi-access KVM SwitchChange Configuration while Running For OSD modelOperation ConfigurationSpecifications AppendicesPossible causes Recommended solutions TroubleshootingSymptom the MasterLimited Warranty
Top Page Image Contents