SOFTWARE/DEVICE INSTALLATION
PIN ASSOCIATION
For Pin Association, it is strongly recommended that you use a TruLink Wireless USB Host Adapter, as some other Wireless USB host adapters may not support the feature. To pin associate with the TruLink Wireless USB Host Adapter, please do the following:
1.Make sure the Wireless AV Adapter Wireless/Wired switch is on Wireless.
2.Open the Wireless USB Manager, and click the Discovery button. The host adapter will look for the Wireless AV Adapter.
3.Once the Wireless AV Adapter is located, you will get the PIN
Association dialog box that prompts you to enter the PIN of the device. The default PIN of the TruLink Wireless AV Adapter is 1234. This number may be changed and the procedure is described in the Appendix section of this guide. Enter the PIN and then click the Accept Association button.
4.The necessary Wireless AV Adapter drivers will install automatically. The VGA Activity Indicator will light on, and you are now ready to use the adapter
Figure: Pin Association Entry
12