Cables to Go 29599 manual Frequently Asked Questions

Page 24

FREQUENTLY ASKED QUESTIONS

6.My Wireless USB Host Adapter is plugged into my computer but I do not hear anything out of my speakers when connected through the Wireless AV Adapter. What’s wrong?

Check the Wireless USB Manager to see if there is an icon for your Wireless AV Adapter. If there is no icon, try unplugging and then plugging in your Wireless USB Host Adapter to reload the Wireless AV Adapter.

If you see an icon that is gray in the Wireless USB Manager, try resetting the Wireless AV Adapter by unplugging its power and plugging it back in. You should see the icon in the Wireless USB Manager appear in color when it is connected.

Still not connected?

If you are using an audio source such as an A/V receiver, make sure the receiver is on the right input channel or attempt troubleshooting with your audio output device equipment.

23

Image 24
Contents User Guide Table of Contents Introduction Features System Requirements RAM 1GBPackage Contents Device Overview SOFTWARE/DEVICE Installation SOFTWARE/DEVICE Installation Important reboot/restart if prompted Figure Wireless USB Manager Do the following before installation Figure Pin Association Entry Verify Connection Using the Wireless AV Adapter Figure TruLink DisplayLink ManagerUsing the Wireless AV Adapter Screen Resolution Color QualityScreen Rotation Extend ToAdvanced Using the Wireless AV Adapter Audio Settings Wireless USB Host Adapter Selection Wireless USB Host Adapter Reset Frequently Asked Questions Why can’t I install .NET?Why is my video choppy? Frequently Asked Questions Video Playback Tips Technical Specifications Systems InformationCables to GO Warranty Statement Important Safety Information There are no User Serviceable PartsAppendix Appendix Cable Association Procedure Appendix Appendix PIN Association Procedure Figure Discovery Mode in Process PIN Change Procedure Appendix Appendix Appendix