Cables to Go 29599 manual PIN Change Procedure

Page 34

APPENDIX

4.Enter the PIN of the Wireless VGA Adapter (4-digit PIN) and click Accept Association. The Wireless VGA Adapter and Wireless USB Host Adapter are now associated and ready for operation.

PIN CHANGE PROCEDURE

The default PIN setting for the Wireless AV Adapter is “1234”. This section gives you the instructions to change the PIN to another 4-Digit value.

IMPORTANT: The application used to change the PIN is not supported in Vista 64bit.

1.Make sure your Wireless USB Host Adapter and the Wireless VGA with Integrated Audio Adapter is not connected to your computer.

2.Open/Launch the application “Pin Update” (C:\Program Files\Wireless USBManager\Utility\PINUpdate). The following dialog will appear:

33

Image 34

Contents User Guide Table of Contents Introduction Features System Requirements RAM 1GBPackage Contents Device Overview SOFTWARE/DEVICE Installation SOFTWARE/DEVICE Installation Important reboot/restart if prompted Figure Wireless USB Manager Do the following before installation Figure Pin Association Entry Verify Connection Using the Wireless AV Adapter Figure TruLink DisplayLink ManagerUsing the Wireless AV Adapter Screen Rotation Screen ResolutionColor Quality Extend ToAdvanced Using the Wireless AV Adapter Audio Settings Wireless USB Host Adapter Selection Wireless USB Host Adapter Reset Frequently Asked Questions Why can’t I install .NET?Why is my video choppy? Frequently Asked Questions Video Playback Tips Technical Specifications Systems InformationCables to GO Warranty Statement Important Safety Information There are no User Serviceable PartsAppendix Appendix Cable Association Procedure Appendix Appendix PIN Association Procedure Figure Discovery Mode in Process PIN Change Procedure Appendix Appendix Appendix