Cables to Go 29599 manual Features

Page 4

FEATURES

Requires an existing USB Host Adapter (#28598 or #29578)-not included

Video and Audio support in a single device adapter, delivered wirelessly from a computer to an external display

Supports high resolution UXGA/WSXGA video and 3.5mm stereo audio

Works in both extended desktop and dual monitor screen modes

Supports native mode for playback of high resolution video

Up to six computers can share one wireless display and speaker set*

One computer can broadcast over six audio/video displays**

Video streaming is supported up to 720p (720p only available at resolution 1024x768 or lower)

In-room wireless connectivity up to 30ft

Ultra-Wide Band operates in the frequency of 3.1GHz to 4.8GHz and 6.3GHz to 7.9GHz (WiMedia™ Band Group 1&3)

Certified Wireless™ USB 1.0 compliant

WiMedia 1.0 MAC & 1.1 PHY compliant

3

Image 4

Contents User Guide Table of Contents Introduction Features System Requirements RAM 1GBPackage Contents Device Overview SOFTWARE/DEVICE Installation SOFTWARE/DEVICE Installation Important reboot/restart if prompted Figure Wireless USB Manager Do the following before installation Figure Pin Association Entry Verify Connection Using the Wireless AV Adapter Figure TruLink DisplayLink ManagerUsing the Wireless AV Adapter Screen Resolution Color QualityScreen Rotation Extend ToAdvanced Using the Wireless AV Adapter Audio Settings Wireless USB Host Adapter Selection Wireless USB Host Adapter Reset Frequently Asked Questions Why can’t I install .NET?Why is my video choppy? Frequently Asked Questions Video Playback Tips Technical Specifications Systems InformationCables to GO Warranty Statement Important Safety Information There are no User Serviceable PartsAppendix Appendix Cable Association Procedure Appendix Appendix PIN Association Procedure Figure Discovery Mode in Process PIN Change Procedure Appendix Appendix Appendix