SETTING UP THE HYPERTERMINAL WITH USB TO SERIAL PORT
Step 1
Make sure that the HyperTerminal is installed in your system. If not, please go to Start, Settings, and Control Panel. Double click Add/Remove Programs, choose Windows Setup Page, Communications, click Details button and enable HyperTerminal to install the program to your Window system.
Step 2
Go to Start, Settings, Control Panel, double click System, and click on Device Manager. Check which COM port is located by USB to Serial Port.
Step 3
If you have setup HyperTerminal before, please go to Start, Programs, Accessories, Communications, HyperTerminal. Click File and choose Properties. The Properties dialog page will appear on your screen. If it is your first time to setup HyperTerminal, you will see the following page during the setup procedure.
Step 4
Click the Connect using item to indicate the proper COM port, which appeared in Step 1. Follow the instructions to complete the setup.
21