Gigabyte GO-RAMDISK-BOX-RH user manual General Precautions, Important Battery Information

English

5.Precautions

General Precautions:

‹ The memory size available will be less than the total size of the installed memory.

‹ When the system is set to RAID mode, the RAID controller might occupy some disk space as buffer. For example, when the ICH7R RAID controller is set to RAID 0 or RAID 1, the total hard drive capacity will be 512MB~1GB less than the actual capacity.

‹ For users who wish to install operating system in i-RAM, please prepare the minimum free hard disk space for the operating system.

‹ To protect data integrity and extend battery lifespan, it is not recommended that you unplug the AC power cord of the power supply.

Important Battery Information:

‹Please do not remove the battery. If the battery appears to be damaged or does not function properly, please contact the place of purchase for further checking.

‹i-RAM memory sockets are powered on after the battery is charged, please handle with care to prevent short circuit and damage.

‹Do not dispose of the battery in fire. To avoid injuries or causing fire hazard, please do not disassemble or touch battery terminals with metal objects or your fingers.

‹If the i RAM box temperature is too high, then it could cause the battery to over heat prompting to battery bulging. This can also affect the battery to be unable to charge and discharge power normally.

Data Loss Preventions:

To prevent data from being lost or damaged, read the following guidelines:

‹Do not remove the installed memory module(s) from i-RAM.

‹The data in the i-RAM will be lost when the battery has no more power.

‹Each time before setting up the i-RAM, make sure to remove system power and the i-RAM battery to prevent damage.

‹Please back up the data in i-RAM regularly using either GIGABYTE's backup tool (please download it from GIGABYTE's website at http://www.gigabyte.com.tw) or third-party backup utilities. Please note that data in i-RAM is not covered under the warranty.