English
8- 6: Install i-RAM BOX into the system
Put i-RAM box into the 5.25 inch cd-rom drive.
8- 7: Connect the power connector of the rear panel
Connect the cable of the 5V SB to the 5V SB connector of the rear panel . Connect another 24 pin power connector to the motherboard (Figure f).
8- 8: Connect the SATA cable to the rear panel
Connect one end of the SATA connector of the rear panel (Figure g) then connect the other end to the motherboard SATA port.
8- 9 : Complete
Figure e | Figure f |
5V SB connector
Figure g | Figure h |
SATA connector |
|
- 8 -