Basic 6 Channel Analog Audio Output Mode
Use the back audio panel to connect the audio output w ithout any additional module.
STEP 1 :
Connect the front channels to “Line Out”,the rear chan- nels to “Line In”, and the Center/Subw oofer channels to “MIC In ”.
STEP 2 :
After installation of the audio driv er, you ‘ll find an
icon on the taskbar’s status area. Click the audio icon “Sound Effect” from the w indow s tray at the bottom of the screen.
STEP 3 :
Select “Speaker Configuration”, and choose the
“6 channels for 5.1 speakers out put”.
Disable “Only
Line Out
Line In
MIC In
English
- 71 - | Technical Reference |