Gigabyte GA-EP45-UD3L Hard Disk Boot Priority, First/Second/Third Boot Device, Password Check

2-5	Advanced BIOS Features
		CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
			Advanced BIOS Features
 Hard Disk Boot Priority			[Press Enter]			Item Help
	First Boot Device		[Floppy]		Menu Level
	Second Boot Device		[Hard Disk]
	Third Boot Device		[CDROM]
	Password Check		[Setup]
	HDD S.M.A.R.T. Capability		[Enabled]
	CPU Multi-Threading (Note)		[Enabled]
	Limit CPUID Max. to 3 (Note)		[Disabled]
	No-Execute Memory Protect (Note)		[Enabled]
	CPU Enhanced Halt (C1E) (Note)		[Enabled]
	C2/C2E State Support (Note)		[Disabled]
	C4/C4E State Support (Note)		Disabled
	CPU Thermal Monitor 2(TM2) (Note)		[Enabled]
	CPU EIST Function (Note)		[Enabled]
	Virtualization Technology (Note)		[Enabled]
	Delay For HDD (Secs)		[0]
	Full Screen LOGO Show		[Enabled]
	Init Display First		[PCI]
: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Hard Disk Boot Priority

Specifies the sequence of loading the operating system from the installed hard drives. Use the up or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or <PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.

First/Second/Third Boot Device

Specifies the boot order from the available devices. Use the up or down arrow key to select a device and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, Legacy LAN, Disabled.

Password Check

Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup. After configuring this item, set the password(s) under the Set Supervisor/User Password item in the BIOS Main Menu.

Setup	A password is only required for entering the BIOS Setup program. (Default)
System	A password is required for booting the system and for entering the BIOS Setup
	program.

HDD S.M.A.R.T. Capability

Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed. (Default: Enabled)

(Note) This item is present only if you install a CPU that supports this feature. For more information

about Intel CPUs' unique features, please visit Intel's website.
- 47 -	BIOS Setup