Gigabyte GA-EP45-UD3LR user manual MB Intelligent TweakerM.I.T, Spd

2-3 MB Intelligent Tweaker(M.I.T.)

CMOS Setup Utility-Copyright (C) 1984-2008 Award Software

MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster			[Auto]
CPU Clock Ratio (Note 1)			[10X]
Fine CPU Clock Ratio (Note 1)			[+0.0]
CPU Frequency			2.66GHz (266x10)
********	Clock Chip Control	********
>>>>> Standard Clock Control
CPU Host Clock Control			[Disabled]
x CPU Host Frequency (Mhz)			266
PCI Express Frequency (Mhz)			[Auto]
C.I.A. 2			[Disabled]
>>>>> Advanced Clock Control
 Advanced Clock Control			[Press Enter]
********	DRAM Performance Control ********
Performance Enhance			[Turbo]
Extreme Memory Profile (X.M.P.) (Note 2)			[Disabled]
(G)MCH Frequency Latch			[Auto]
System Memory Multiplier		(SPD)	[Auto]

Item Help

Menu Level

: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

CMOS Setup Utility-Copyright (C) 1984-2008 Award Software

MB Intelligent Tweaker(M.I.T.)

	Memory Frequency (Mhz)	1333	1066
	DRAM Timing Selectable	(SPD)	[Auto]
	>>>>> Standard Timing Control
x	CAS Latency Time	5	Auto
x	tRCD	5	Auto
x	tRP	5	Auto
x	tRAS	15	Auto
	>>>>> Advanced Timing Control
	Advanced Timing Control		[Press Enter]
	******** Mother Board Voltage Control ********
	Voltage Types	Normal	Current
	------------------------------------------------------------------
	>>> CPU
	Load-Line Calibration		[Disabled]
	CPU Vcore	1.12500V	[Auto]
	CPU Termination	1.200V	[Auto]
	CPU PLL	1.500V	[Auto]
	CPU Reference	0.760V	[Auto]

Item Help

Menu Level

: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

(Note 1) This item appears only if you install a CPU that supports this feature.

(Note 2) This item appears only if you install a memory module that supports this feature.

- 37 - BIOS Setup