Gigabyte GN-BR30N-RH manual Using a Wireless Connection, Connecting the Router to the Internet

GN-BR30N-RH 2.4GHz AirCruiser N300 Wireless Router

side panel of the GN-BR30N-RH and the other end to the 10/100 Ethernet port of your computer. (It does not matter which LAN port you

select).

Step 4 Plug the power adapter cord into the router’s power jack and then plug the power adapter into a power outlet.

Step 5 Turn on your ADSL/Cable modem. After verifying all the connections, proceed to Chapter 5 Connecting the Router to the Internet.

Using a Wireless Connection

Step 1 Turn off all the hardware devices in your network, including the ADSL/Cable modem by unplugging their power supply.

Step 2 Connect the Ethernet cable of your ADSL/Cable modem to the WAN port of the GN-BR30N-RH.

Step 3 Plug the power adapter cord into the router’s power jack and then plug the power adapter into a power outlet.

Step 4 Turn on your ADSL/Cable modem.

Step 5 Insert you PCMCIA notebook card, or wireless USB adapter into your notebook PC.

Step 6 If using a GIGABYTE PCMCIA notebook card, SmartSetup 3 will automatically detect your BR30N-RH and walk you through the setup procedure (for more details refer to your SmartSetup 3 Guide). Please refer to your vendor’s users manual for connecting to the wireless network.

Step 7 When scanning for available wireless networks, your BR30N-RH’s factory default SSID name is GIGABYTE. Select it using the procedures described in your particular vendor’s notebook adapter users manual.

Step 8 After verifying all the connections, proceed to Chapter 5

Connecting the Router to the Internet.

8