Gigabyte GN-FE605 manual Snmp service operation, Install Snmp service in Windows 2000/XP

GN-FE605(M) PCI Adapter User’s Guide

SNMP service operation

Install SNMP service in Windows 2000/XP

In Microsoft windows 2000 and XP, SNMP service installation procedure is listed as the following:

1.Click Start, point to Settings, click Control Panel, double-click Add/Remove Programs, and then click Add/Remove Windows Components.

2.In Components, click Management and Monitoring Tools (but do not select or clear its check box), and then click Details.

3.Select Simple Network Management Protocol check box, and click OK.

4.Click Next to do the installation.

Note:

1.You must be logged on as an administrator or a member of the Administrators group in order to complete this procedure. If your computer is connected to a network, network policy settings might also prevent you from completing this procedure.

2.SNMP starts automatically after installation.

Install SNMP service in Windows 98

In Microsoft windows and 98, SNMP service installation procedure is listed as the following:

1.Click Start, point to Settings, click Control Panel, double-click Network, and then click Add.

2.In the select Network Components Type dialog box, double click Service.

3.In the select Network Service dialog box, click Have Disk.

4.In the Install From Disk dialog box, type the path to the \TOOLS\RESKIT\NETADMIN\SNMP directory on the windows 98 compact disc, and then click OK.

5.In the select Network Service dialog box, select Microsoft SNMP agent from the Models list, and then click OK.

37