2 Install Drivers
Before installing your Celerity adapter, you must configure your system to recognize and use it by installing drivers for your operating system.
Configure your system to recognize and use your Celerity adapter by installing drivers for your operating system.
Note
If you already have one or more Celerity adapters installed and you are installing additional adapter(s), you do not need to perform any of these procedures unless you are updating a previously installed driver.
ATTO Celerity adapters ship with the latest firmware installed. The Celerity FC Installation CD shipped with your adapter also contains the latest driver.
The Installation CD automatically starts when inserted in the system
The Celerity FC Installation CD referred to in these instructions can be the Installation CD shipped with your adapter, a folder containing the latest downloaded and expanded driver, a Celerity FC installation floppy disk, or a USB flash drive.
Windows
Note
Windows 7, Vista and 2008 may utilize a new User Account Control Feature. Because of this there may be additional confirmations that will need to be performed to properly install the driver. These confirmations normally consist of a dialog where the user has to give Windows permission to perform an action. If you do not have the correct priviliges during this, you will be prompted for an actual user name and password. You may need to contact your system administrator if you do not have this information.
Driver Installation
1Power on your system and log in as the administrator or a user with proper administrative priveleges.
2Insert the Installation CD. The ATTO Installation CD guide should appear. If not,
navigate to the root of the CD and run the AUTORUN.BAT batch file.
3Click on Windows Drivers.
4Click on Windows XX Driver link based on the HBA speed (4Gb or 8Gb) and operating system (x86, x64 or Itanium) in use. If you are unsure which version you are using, please contact your system administrator.
5Click Install Windows Driver XX next to the appropriate item to initiate the driver setup program.
6Follow the
Note
WHQL Certified Drivers are available for select Celerity Fibre Channel HBAs. If available, these drivers will be listed below the default Windows drivers.
12 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual