ATTO Technology FC-81EN, FC-84EN Creating and using the Driver CD, Driver CD as a Boot CD Only

Page 20

2Extract the offline_bundle.zip from the ISO image.

3Use the Data Browser in the vSphere Client to upload the ZIP file that was extracted from the ISO to your ESX host.

Note

Alternatively, you can use a program like WinSCP to upload the file directly to your ESX host. However, it requires root privileges to the host to perform the upload.

4Log in to the ESX host as root directly from the Service Console or through an SSH Client.

5Place the ESX host in Maintenance Mode from the vSphere Client.

6Run this command from the Service Console or your SSH Client to install the bundled package:

esxupdate --bundle=<name of bundled zip> update

7When the package has been installed, reboot the ESX host by typing reboot from the Service Console.

VMware ESX 3.5

For ESX Server 4.0 please refer to VMware ESX 4 on page 15

Note

8 & 4Gb Celerity PCIe support only. PCIx cards are not supported.

Creating and using the Driver CD.

1Download the correct driver .iso file from the VMware Drivers & Tools Download site.

2Write the .iso image to a CD-ROM.

3Use the CD-ROM as a Boot CD or an Update CD.

Driver CD as a Boot CD Only

Note

The following procedure describes how to use the driver CD as a boot CD. Use this CD as a boot CD only if the new driver must enable the target device on which ESX Server 3.5 will be installed.

1Place the driver CD in the CD-ROM drive of the host machine.

7After ESX Server is installed and the system reboots, log in to ESX Server.

8Verify that the driver is installed successfully:

a.Run the esxupdate query command. A message containing the information about the driver appears.

b.View the PCI ID XML file in the /etc/vmware/pciid/ directory. The driver information is available in the file.

c.Check for the latest version of the driver module in the following directory:

/usr/lib/vmware/vmkmod/

d.To verify that the driver is loaded and functioning, enter vmkload_mod -lcommand. The driver is listed in the displayed list.

Driver CD as an Update CD Only

Note

The following procedure describes how to use the driver CD to update or add the driver on an existing ESX Server 3.5.

2Start the host machine.

3When prompted for an upgrade or installation, press Enter for graphical mode.

4Choose the language you prefer.

5Select a keyboard type.

6After you are prompted to swap the driver CD with the ESX Server installation CD, insert the ESX Server 3.5 installation CD and continue with ESX Server installation.

1Start the ESX Server machine and log in to service console as root.

2Place the driver CD in the CD-ROM drive of the server.

3Mount the driver CD.

4Change the directory to the VMupdates/RPMS/ on the driver CD.

16 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Atto Celerity Fibre Channel Host Adapters Atto Technology, Inc Contents Appendix F Safety, Warranty Appendix E Standards, Compliances 4Gb adapters ViiiAtto Celerity HBA Features & Overview Getting startedCelerity FC-84EN Adapter Celerity FC-82EN Adapter Celerity FC-81EN Adapter Celerity FC-44ES Adapter Celerity FC-42ES Adapter Celerity FC-41ES Adapter PCI bus specifications Celerity FC-42XS AdapterCelerity FC-41XS Adapter Selection guide Celerity 8-Gb adapters FC-84EN FC-82EN FC-81ENSelection guide Celerity 4-Gb adapters FC-42XS FC-41XSInstall Drivers Driver InstallationWindows Click on Windows DriversCreating Windows installation media Driver Installation for all Atto FC host adaptersPage Driver CD usage during ESX Installation 4.x only Driver CD as an Update CD 4.x onlyLinux VMware ESXCreating and using the Driver CD Driver CD as a Boot CD OnlyDriver CD as an Update CD Only Esxupdate --bundle=name of bundled zip updateSpecialized configurations Run the esxupdate update commandHardware Installation InstallationSystem requirements Fibre Channel addressBracket details Page Adapter board details Exhibit 3-13 FC-81EN Exhibit 3-14 FC-44ES Exhibit 3-15 FC-42ES Exhibit 3-17 FC-42XS Exhibit 3-18 FC-41XS Updating the Atto Configuration Tool Updating Hardware Flash, DriversUpdating flash Updating driversClick on downloads Troubleshooting General suggestionsMac OS Windows Server 2008, 2003, 2000 Vista, XPVMware Appendix a Glossary Term DefinitionPCI Appendix B Accessories Ultra 320 Scsi Product Features Appendix C Atto Adapter Selection GuidesProduct H308 H380 H30F R348 R380 R30F Features ExpressSAS Host and RAID adaptersProduct H6F0 H60F H680 H608 H644 Features ExpressSAS 6 Gb Host adaptersProduct R60F R680 R608 R644 Features ViiAppendix D Standards, Compliances 8Gb adapters FCC standards radio and television interferenceCanadian standards European standardsAppendix E Standards, Compliances 4Gb adapters Appendix F Safety, Warranty SafetyAtto Technology, Inc. limited warranty Operation
Related manuals
Manual 2 pages 11.64 Kb Manual 2 pages 13.96 Kb Manual 2 pages 6.48 Kb

FC-81EN, FC-82EN, FC-84EN specifications

ATTO Technology's FC-82EN is a 16Gb Fibre Channel HBA (Host Bus Adapter) that provides high-performance connectivity for storage area networks. Designed for use with both Windows and Linux operating systems, the FC-82EN is ideal for enterprises seeking to optimize data transfer rates and reduce latency for mission-critical applications.

One of the key features of the FC-82EN is its support for 16Gb Fibre Channel, which doubles the bandwidth from previous generations, allowing for faster data transfers. This is particularly beneficial in environments with heavy I/O workloads, such as virtualized data centers and large databases. With its backward compatibility, users can seamlessly integrate the FC-82EN into existing Fibre Channel networks that operate at 4Gb and 8Gb speeds, ensuring flexibility and protecting existing investments.

The FC-82EN employs advanced technologies to enhance performance and reliability. It incorporates ATTO's proprietary Advanced Data Streaming (ADS) technology, which optimizes data flow between the host system and storage devices. By minimizing processing overhead and maximizing throughput, ADS ensures that data-intensive applications run smoothly. Additionally, the HBA features a built-in intelligent caching mechanism to help manage data transfer and reduce bottlenecks.

Another significant characteristic of the FC-82EN is its support for multipathing, which enhances availability and load balancing across multiple paths in a storage network. This feature is crucial in distributed systems where uptime is critical, as it helps to prevent single points of failure and effectively utilizes available resources.

For manageability and ease of use, the FC-82EN includes ATTO's configurable driver and management software, providing users with a comprehensive suite of tools for monitoring performance, configuring settings, and troubleshooting issues. The adapter also supports end-to-end error detection and recovery protocols, ensuring data integrity throughout the transfer process.

In summary, the ATTO Technology FC-82EN is a robust and versatile Fibre Channel HBA that meets the demanding requirements of modern data environments. With its high-speed capabilities, advanced technologies, and strong management features, the FC-82EN is an excellent choice for organizations looking to enhance their storage network performance and reliability.
Top Page Image Contents