ATTO Technology FC-84EN, FC-82EN Specialized configurations, Run the esxupdate update command

5Run the esxupdate update command.

Note

If the hardware is not already installed on the system, run the esxupdate command with the --noreboot option, shut down the host machine manually, install the hardware, and then boot the host machine. This allows you to install in a single boot.

The server reboots after the driver update.

6Remove the driver CD from the CD-ROM drive before the system reboots.

7After the system reboots, log in to ESX Server.

8Verify that the driver is installed successfully:

a.Run the esxupdate query command and verify that the information about the driver is mentioned in the resulting message.

b.View the PCI ID XML file in the /etc/vmware/pciid/ directory. The driver information is available in the file.

c.Check for the latest version of the driver module in /usr/lib/vmware/vmkmod/

d.To verify that the driver is loaded and functioning, run the vmkload_mod -lcommand. The driver is listed in the displayed list.

Specialized configurations

Some specialized applications may benefit from modification of adapter settings. The ATTO Utilities Installation and Operation Manual provides detailed information on using ATTO Technology configuration utilities found on the Installation CD or downloaded from the ATTO website.

17