ATTO Technology 3400 operation manual Contents

Page 4

Contents
1 Fibre Channel is a key technology for storage	1
Glossary
2 ATTO FibreCenter supports diverse SAN needs	3
Quick start instructions
3 ATTO FibreCenter 3400 characteristics	5
Specifications
Local and network management
Features
4 Setting up the FC Rack System	7
Physical dimensions
Operating environment
Mounting
Air flow and cooling
Internal power distribution
Installing a power module
Removing a power module
5 Setting up the ATTO FibreCenter	9
Installing the FibreCenter
To change the password
Connecting Fibre Channel ports
Cabling
Removing the FibreCenter
6 Configuring the ATTO FibreCenter	11
Data transfer when setting up zones
FibreCenter behavior on reset or power-up
Zone 1
Zone 2 and Zone 3
7 Command Line Interface use and guidance	13
CLI command conventions
7.1 Ethernet and Telnet configuration commands	15
Default Router
Echo
Factory Defaults
Idle Timeout
IP Address
Security Traps
Subnet Mask
Telnet
Telnet Status
7.2 Diagnostic commands	16
Status
Telnet Status
Version

Image 4

Contents Atto FibreCenter Secure Data Path Application Page Page Contents Configuration commands Glossary Fibre Channel is a key technology for storageTerm Definition LED Atto FibreCenter supports diverse SAN needs Quick start instructionsZone Port Atto FibreCenter 3400 characteristics SpecificationsFeatures Local and network managementSecure Data Path Applicationv Setting up the FC Rack System Installing a power module Removing a power moduleInstalling the FibreCenter Setting up the Atto FibreCenterTo change the password Connecting Fibre Channel ports Cable length Cable type Cable size ConnectorRemoving the FibreCenter CablingData transfer when setting up zones Configuring the Atto FibreCenterZone 2 and Zone Invalid Switching Patterns Hub portsCommand Line Interface use and guidance CLI command conventionsTelnet session Screen Symbol IndicatesExplanation Ethernet and Telnet configuration commands Status Diagnostic commandsVersion Configuration commands Switch model Setup commandLinux Kernel Update Flash File System FFS UpdateType reboot and hit Enter at the bash# prompt Updating firmwareIf LED is illuminated If LED is not illuminated TroubleshootingCondition Index Command Line Interface Command Default ExampleCanadian Standards Appendix a Standards and compliancesEuropean Standards Declaration of Conformity Appendix B Contact Atto Technology, Inc