Celerity FC-24XL Adapter

The Celerity FC-24XL is a Fibre Channel advanced host adapter with four independent channels of 2-Gb connectivity and advanced functions and embedded processing and buffering capabilities to enable data stream manipulation, direct port-to-port transfers, offload processing, video handling and a myriad of other capabilities. The Integrated Offload & Processing Center (IOPC) uses an Intel XScale® processor core and an internal 133 MHz PCI-X data bus for top performance and low latency. IOPC simplifies and augments SAN fabric management, including:

•Port-to-port data streaming

•Hardware RAID

•Backup offload

•Metadata insertion

•Data protection

•Video handling

Hardware specifications

•Four independent data channels, each supporting 2-Gb Fibre Channel performance

•2.125-Gigabit data transfer rates per channel

•400 MB/sec. maximum full duplex throughput per channel

•Supports all FC topologies: direct fabric, arbitrated loop and point-to-point

•Flash ROM for easy field upgrades

•Simultaneous multi-protocol support

IOPC specifications

•Developer’s kit for OEMs

•Intel IOP80331 XScale processor core

•Supports up to 512 MB DDR 333 MHz SDRAM

•Internal 133 MHz PCI-X bus

•EDC error correction hardware capable of end- to-end data integrity

•ANSI Fibre Channel: FC-PH, FC-FCP, FC- FCP2, FC-AL, FC-AL2, FC-PLDA, FC-FLA,

IETF-IPFC

Advanced FC capabilities

•Supports SNIA HBA API

•On-demand, automatic negotiation between 2- Gb and 1-Gb Fibre Channel

•Supports target and Initiator modes

•Supports Windows FDMI and WMI

•Exclusive Advanced Data Streaming (ADSTM)

Technology

PCI Bus Specifications

•64-bit, 133 MHz PCI-X

•64/32-bit, 100/66/33 MHz PCI compatible

•PCI-X 1.0a compliant

•PCI 2.3 compliant

•3.3V PCI signaling only

Environmental & physical specifications

•Conforms to PCI full form factor standards

•Length: 6.600 inches

•Height: 4.200 inches

•Operating Temperature: 0-45ºC (32º-113ºF)

•Storage Temperature: -40º to 70ºC (-40º to 158ºF)

•Relative Humidity: 5 to 95% non-condensing

•+3.3 V@4.0A (max.)

•100 lf/m (minimum) airflow recommended

External connectivity

•Easy-to-install connection plate

•Up to four shortwave optical LC SFP pluggable transceivers

•Two optical LC SFP transceivers included

•External LEDs to show on-line and speed status for each channel

Software specifications

•Windows XP, 2000, Server 2003

•Red Hat Linux (2.4 and 2.6 kernel)

•SUSE Linux (2.6 kernel)

•Mac OS X

7 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual