ATTO Technology FC-44ES 4-Gb operation manual Celerity FC-42XS Adapter, PCI bus specifications

Page 9

Celerity FC-42XS Adapter

The dual-channel Celerity FC-42XS host adapter provides the highest available throughput for Fibre Channel applications while protecting technology investments via backward compatibility with existing infrastructure.

With speeds of up to 800 MB/sec. per channel, the FC- 42XS is capable of supporting the most intensive data applications.

To ensure a smooth transition path, the FC-42XS leverages the existing Celerity FC software hardware architecture, allowing ATTO to deliver industry- leading quality and stable software architecture.

Hardware specifications

Two independent Fibre Channel ports

4-Gigabit data transfer rates per channel

800 MB/sec. maximum full-duplex throughput per channel

Supports all FC topologies: direct fabric, arbitrated loop and point-to-point

ANSI Fibre Channel: FC-PH, FC-FCP, FC FCP2, FC-AL, FC-AL2, FC-PLDA, FC-FLA

Flash ROM for easy field upgrades

FC Class 3 support

Local management and diagnostics

Buffer credits: 8 @ 512 bytes; 8 @ 2k bytes

Advanced FC capabilities

Supports SNIA HBA API

On-demand automatic negotiation among 4- Gb, 2-Gb and 1-Gb Fibre Channel

Supports target and initiator modes

Supports Windows FDMI and WMI

Exclusive Advanced Data Streaming (ADSTM) Technology

PCI bus specifications

64-bit, 133 MHz PCI-X

PCI-X 1.0a compliant

PCI 2.2 compliant

3.3V PCI signaling only

Environmental & physical specifications

Conforms to PCI low profile form factor standards

Length: 6.600 inches

Height: 2.536 inches

Operating Temperature: 0-45ºC (32º-113ºF)

Storage Temperature: -40º to 70ºC (-40º to 158ºF)

Relative Humidity: 5 to 95% non-condensing

5V@ 1.5A (max.)

100 lf/m (minimum) airflow recommended

External connectivity

Easy-to-install full height connection plate

External LEDs for on-line and speed status for each channel

Two optical LC SFP transceivers included

Software specifications

Windows XP, 2000, Server 2003

Red Hat Linux (2.4 and 2.6 kernel)

SUSE Linux (2.6 kernel)

Mac OS X

4

Image 9
Contents Celerity FC host adapters Page Page Contents Configuring and updating drivers Hardware installationUpdating hardware flash Troubleshooting Appendix B Accessories IiiCelerity FC-44ES Adapter Atto provides Fibre Channel solutionsCelerity FC-42ES Adapter Celerity FC-41ES Adapter Celerity FC-42XS Adapter PCI bus specificationsCelerity FC-41XS Adapter Celerity FC-21PS Adapter Celerity FC-24XL Adapter Iopc specificationsFeatures Celerity Selection GuideCelerity FC host adapters Product Fibre Channel is a key technology for storage GlossaryTerm Definition LED Installation Hardware installationSystem requirements Fibre Channel addressExhibit 3-1 FC-44ES Adapter Exhibit 3-3 FC-41ES Adapter Bracket detailsExhibit 3-6 FC-21PS Adapter Adapter board details Exhibit 3-10 FC-42ES RoHS SFF duplex LC optical connector FC controller FC controllers PCI-X connectorPage Initial configuration Configuring and updating driversWindows 2000/XP/Server Upgrading your existing Celerity FC driverPage Mac OS X driver installation, update Linux driver installation, updateNew or previous installation Launch the Configuration Tool To update hardware flash in all operating systemsTo update hardware flash on a PC using the Bios utilities Updating hardware flashIf devices are not accessible TroubleshootingMac OS General suggestionsLinux Select PropertiesSelect Device Manager FCC standards radio and television interference Appendix a Standards and compliancesCanadian standards European standardsUsage restrictions Fibre Channel and iSCSI solutions Appendix B AccessoriesScsi solutions Optical CablesAppendix C Scsi adapter selection guide Ultra Product FeaturesAppendix D Contact Atto Technology, Inc