Apple EPR2320TM, DPR2320TM manual Front Panel Description

Front Panel Description

Front Panel Description

The front panel of your cable modem provides status lights that indicate how well and at what state your cable modem is operating. After the cable modem is successfully registered on the network, the POWER and CABLE status indicators illuminate continuously to show that the cable modem is active and fully operational. See Front Panel Status Indicator Functions, later in this guide, for more information on front panel status indicator functions.

by Scientific-Atlanta, Inc.

1	POWER	DATA
2	RECEIVE
3	SEND
4	CABLE
5		PC

6

T10948

1POWER—Illuminates solid green to indicate that power is being applied to the cable modem

2RECEIVE DATA—Blinks to indicate that the cable modem is receiving data from the cable network

3SEND DATA— Blinks to indicate that the cable modem is sending data to the cable network

4CABLE—Illuminates solid green when the cable modem is registered on the network and fully operational. This indicator blinks to indicate one of the following conditions:

•The cable modem is booting up and not ready for data

•The cable modem is scanning the network and attempting to register

•The cable modem has lost registration on the network and will continue blinking until it registers again

5PC—Illuminates solid green to indicate that an Ethernet/USB carrier is present and blinks to indicate that Ethernet/USB data is being transferred between the PC and the cable modem

6PC Wireless—Illuminates solid green to indicate that a wireless access point is enabled and blinks to indicate that wireless data is being transferred over the wireless connection

Note: After the cable modem is successfully registered on the network, the POWER (LED 1) and CABLE (LED 4) indicators illuminate continuously to indicate that the cable modem is online and fully operational.

7