Teac AG-H380 AUX 1/AUX 2/CD jacks, Phono jacks, USB port, AC Power Cord, Compatible iPod Software

Page 7

AAUX 1/AUX 2/CD jacks

These jacks transmit an analog 2-channel audio signal. Connect the components using RCA cables.

Make sure to connect the cables as follows:

white plug w white jack (L: left channel) red plug w red jack (R:right channel)

White (L)

White (L)

Red (R)

Red (R)

If you want to use a recorder (ex. a cassette deck or a CD recorder, etc.) with the AG-H380, connect the output jacks of the recorder to the AUX 1 IN jacks of the AG-H380, connect the input jacks of the recorder to the AUX 1 OUT jacks of the AG-H380.

<Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

BPHONO jacks

Connect the turntable’s RCA pin cord to the PHONO jacks.

Make sure to connect the cables as follows:

white plug w white jack (L: left channel) red plug w red jack (R:right channel)

<Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

<Moving Magnet (MM) cartridges can be used for this unit.

CSIGNAL GND

Connect the ground lead of the turntable to this terminal.

<This is not a safety earth.

<If the turntable’s ground lead is not connected to this terminal, hum noise may be heard.

DUSB port

Connect the iPod or external USB storage device to this port.

<To connect the iPod, use the USB cable supplied with iPod.

<It cannot be played if you connect an iPod shuffle to this port.

Compatible iPod Software

In case your iPod will not work with the AG-H380 or with the remote control unit, software update may solve the problem. Visit the Apple website and download the latest iPod software.

EAC OUTLET (SWITCHED)

You can connect the AC power cord of your component.

This outlet is active only when the unit is on or standby. When the unit is off, the outlet is inactive.

CAUTION

Make sure that the total power consumption of all equipment connected to this outlet does not exceed 100 watts (or 500mA).

FAC Power Cord

Plug this cord into an AC wall socket.

<Unplug the power cord when you are not going to use the unit for long periods of time.

ENGLISH

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AG-H380 Important Safety Instructions Page Before Use ContentsMP3 and WMA FM Outdoor Antenna Connecting Antennas AM/FMAM Indoor Loop Antenna FM Indoor AntennaPD-H380 ConnectionsTurntable DVD player, etcUSB port AC Power CordAUX 1/AUX 2/CD jacks Phono jacksSubwoofer Speaker ConnectionsSubwoofer OUT jack How to connectSystem Connection Speaker ConnectionsName of Each Control STANDBY/ON TimerFM Mode VolumePrecautions Concerning Batteries Remote Control UnitBattery Installation Battery ReplacementListening through headphones How to turn the unit on or offHow to select source Adjust the volumeListening to iPod How to adjust the bass and treble soundTo pause playback Select the menu item To skip to the next or a previous songSearch for a part of a song To go back to the previous menuListening to an USB Device Changing the display modeDirect Mode default Extended modeTo skip to the next or a previous song To pause playback pause modeSearch To stop playbackRepeat all the songs RPT All Repeat Playback USBShuffle Playback USB Repeat one file RPTWithin 5 seconds, press the Program button Press the Program button in the stop modeProgrammed Playback USB Press the ˙ or ¥ button to select a fileTo add a file to the programme To check the programmed orderTo delete a file from the programme To clear the programme Before Recording Display USBDeleting a file from USB Recording to USBWithin 3 seconds, press the Clear button Listening to FM/AM FM ModeManual Preset AM/FM Preset TuningPresetting Automatically Tune in an FM station see Press the RDS button PTY SearchInformation Alarm Test Alarm-AlarmNews Current AffairsPress the Time SET button Setting the ClockTimer Operation Setting the TimerTimer Playback SLEEP-90 80, 70 Sleep TimerTimer Recording Timer offTroubleshooting Restoring factory settingsMaintenance SpecificationsTeac Corporation

AG-H380 specifications

The Teac AG-H380 is a high-fidelity audio receiver that exemplifies the perfect merging of classic design and modern technology. Tailored for audiophiles and casual listeners alike, this receiver boasts a wide range of features that ensure a superb listening experience.

At the heart of the AG-H380 is a robust amplifier section, delivering 80 watts per channel at 4 ohms. This power output guarantees that music playback is not only loud but also rich in detail and nuance. The receiver's high-current design allows it to drive even challenging speaker loads, making it versatile for various setups.

One of the standout features of the AG-H380 is its support for high-resolution audio formats. With native playback of PCM up to 32-bit/192 kHz and DSD up to DSD128, it caters to the modern listener who seeks superior sound quality. The inclusion of a built-in USB DAC enhances convenience, allowing users to connect their computers directly to the receiver without the need for additional components.

The AG-H380 does not shy away from versatility in connectivity. It offers multiple digital inputs, including optical and coaxial, along with traditional analog inputs for older equipment. Furthermore, Bluetooth connectivity allows for seamless streaming from smartphones and tablets, ensuring that users can enjoy their favorite tracks without cumbersome wires.

Another impressive aspect of the Teac AG-H380 is its advanced digital signal processing (DSP) capabilities. Advanced EQ settings enable users to customize their sound signature according to personal preferences and acoustic environments. This feature is especially beneficial for those who want to tailor their listening experience to specific rooms or speaker placements.

In terms of build quality, the AG-H380 reflects Teac's commitment to craftsmanship. The elegant design, characterized by a classic front panel with analog-style knobs, appeals to both retro enthusiasts and contemporary users. The all-metal chassis not only adds aesthetic appeal but also minimizes interference, leading to clearer sound.

Additionally, the AG-H380 includes a headphone output with a high-quality amplifier circuit, ensuring an exceptional listening experience for private sessions.

In conclusion, the Teac AG-H380 combines traditional aesthetics with cutting-edge technology, making it an ideal choice for both modern and classic audio enthusiasts seeking high-quality performance in an attractive package.
Top Page Image Contents