Tripp Lite BC Personal, BC Internet specifications Storage & Service, Specifications

Storage & Service

Storage

First turn your UPS OFF and disconnect its power cord from the wall outlet. Then disconnect all equipment to avoid battery drain. If you plan on storing your UPS for an extended period of time, fully recharge the UPS batteries once every three months by plugging the UPS into a live AC outlet and letting the UPS charge for 4 to 6 hours. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity, leaving your UPS unable to provide adequate protection.

Service

Before returning products for service, contact Tripp Lite customer support. If returning your UPS to Tripp Lite, please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the UPS is within the 2 year warranty period, enclose a copy of your sales receipt.

Specifications

	BC Personal 200	BC Personal 300
Output Capacity (VA/Watts):	200/125	300/175
Battery Runtime (Half Load/Full Load) Minutes:	28/10	17/5
Battery Recharge Time:	2-4 hrs	2-4 hrs
Approvals:	UL, cUL, NOM	UL, cUL, NOM
Modem/Fax Protection	_	_
(Starting at 260V)
	BC Personal 450	BC Internet 300
Output Capacity (VA/Watts):	450/280	300/175
Battery Runtime (Half Load/Full Load) Minutes:	17/5	17/5
Battery Recharge Time:	2-4 hrs	2-4 hrs
Approvals:	UL, cUL, NOM	UL, cUL, NOM
Modem/Fax Protection	_	1 line
(Starting at 260V)
	BC Internet 400	BC Internet 500
Output Capacity (VA/Watts):	400/250	500/280
Battery Runtime (Half Load/Full Load) Minutes:	17/5	17/5
Battery Recharge Time:	2-4 hrs	2-4 hrs
Approvals:	UL, cUL, NOM	UL, cUL, NOM
Modem/Fax Protection	2 lines	2 lines
(Starting at 260V)

ALL MODELS:

Input Voltage/Frequency (120V/60 Hz); On Battery Output Voltage Range (120V +/- 5%); Output Waveform Line Mode (filtered sine wave); Output Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC Protection Modes (H to N, H to G, N to G)

FCC Part 68 Notice (U.S. only)

If your Modem/Fax Protection causes harm to the telephone network, the Telephone Company may temporarily discontinue your service. If possible, they will notify you in advance. If advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper operation of your equipment. If it does, you will be given advance notice to give you an opportunity to maintain uninterrupted service. If you experience trouble with this equipment's Modem/Fax Protection, please contact the Manager of Technical Support; Tripp Lite; 1111 W. 35th Street, Chicago, Illinois 60609; Phone: (773) 869-1234, for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure the equipment is not malfunctioning. There are no repairs that can be made by the customer to the Modem/Fax Protection. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information.)

6