The Power Supply's advanced
The Power Supply's internal Automatic Transfer Switch (ATS) allows the power supply to simultaneously run connected equipment while recharging the battery module
The Power Supply also features 3 NEMA
PowerAlert
Remote User Interface (RUI) displays output and battery charge status at a glance. Includes on/off and
Mounting Hardware Kit retrofits most standard medical carts from AFC, Anthro, Datalux, GCX, Hergo, Humanscale, Jaco, Knurr, Stinger and more
Specifications
OVERVIEW
Intended Application | Hospitals & Medical Facilities |
|
|
SYSTEM OVERVIEW |
|
Voltage compatibility | 120VAC |
|
|
Frequency compatibility | 60 Hz |
|
|
OUTPUT |
|
Output watts
Output nominal voltage
Outlet quantity / type
Continuous output capacity (watts)
Peak output capacity (watts)
INPUT
300W (continuous) / 750W (peak)
120V
3 AC outlets
300
750
Input connection type
Input cord length
Recommended Electrical Service
BATTERY
NEMA
15A 120V
DC system voltage | 12V |
|
|
Battery recharge rate | Equal to discharge time. Includes advanced |
|
|
LEDS ALARMS & SWITCHES |
|
Front panel LEDs | On Remote User Interface (RUI): Output AC Power, Battery Charge Level and Battery Charging Status |
|
|
Alarms
Low Battery Alarm
Switches | On Remote User Interface (RUI): On/Off Switch and |
|
|
SURGE / NOISE SUPPRESSION |
|
AC surge suppression | Yes. When unit is connected to utility power. |
|
|
EMI / RFI AC noise | Yes. When unit is connected to utility power. |
suppression |
|
|
|
PHYSICAL |
|
Shipping weight (lbs)
Power Supply: 16 lb.
Unit weight (lbs)
Power Supply: 14.4 lb.
Unit Dimensions (HWD/in)
Power Supply: 11.5 x 6 x 3.5 in.