Tripp Lite SU1000RTXL2UA warranty Physical, Environmental, Communications, Line / Battery Transfer

EMI / RFI AC noise	Yes
suppression
PHYSICAL
Shipping weight	41
(lbs)
Shipping weight	18.5
(kg)
Shipping	9.5 x 20 x 24
Dimensions
(HWD/in)

Shipping Dimensions (HWD/cm)

24.1 x 50.8 x 61

Unit weight (lbs)	29
Unit weight (kg)	13.1
Unit Dimensions	3.5 x 17.5 x 13.5
(HWD/in)
Unit Dimensions	8.9 x 44.5 x 34.3
(HWD/cm)
Material of	Steel
construction
Form factors	Rack (2U)
supported
Cooling method	Built-in cooling fan
Battery Access	User replaceable, hot swap battery replacement supported via front access panel
ENVIRONMENTAL
Relative Humidity	0 to 95%, non-condensing
Storage	+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Temperature
Operating	+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Temperature
COMMUNICATIONS
Network	Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact
monitoring port	closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto
	shutdown features of Windows and Mac OS X.
Software and	Yes, includes PowerAlert software CD-ROM and complete cabling
cabling included
SNMP compatibility	Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD)
WatchDog	Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot
compatibility	of application / OS or hard power off/on reboot of connected equipment—ideal for unattended kiosk applications

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

Low voltage transfer to battery power

Zero, online UPS continuously converts incoming AC to DC, then back to AC. When commercial power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.

Maintains continuous operation during undervoltages as low as 65V (80V at load levels over 70%). Below this switchover point, output is supported from battery derived AC power.

High voltage	Maintains continuous operation without using battery power during overvoltages to 138V. Above this point, output is
transfer to battery	supported from battery derived AC power.
power
SPECIAL FEATURES
EPO port	Supports "Emergency Power Off" via dedicated built-in EPO jack

Cold Start

Yes, inverter can be "cold started" to enable temporary AC output during a power failure