Other UPS Features Rear Panel | Tripp Lite SMX1500SLT, SMX750SLT

Basic Operation continued

Other UPS Features (Rear Panel)

230V

220V

240V

230V

240V

230V

220V

230V

AC Receptacles: Your UPS features IEC-320-C13 outlets. These output receptacles provide your connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. The UPS protects equipment connected to these receptacles against damaging surges and line noise.

Communications Ports (USB or RS-232): These ports connect your UPS to any workstation or server. Use with Tripp Lite’s PowerAlert Software and included cables to enable your computer to automatically save open files and shut down equipment during a blackout. Also use PowerAlert Software to mon- itor a wide variety of AC line power and UPS operating conditions. Consult your PowerAlert Software manual or contact Tripp Lite Customer Support for more information. See “USB and RS-232 Serial Communications” in the “Optional Installation” section for installation instructions.

Telephone/Network Protection Jacks: These jacks protect your equipment against surges over a telephone/network data line. Connecting your equipment to these jacks is optional. Your UPS will work properly without this connection.

Not compatible with PoE (Power Over Ethernet) applications.

Voltage DIP Switches: These switches enable the UPS to be set to match actual input voltage. If the Voltage DIP Switches are set above or below input voltage, the UPS will treat the input as a continuous overvoltage or undervolt- age condition, and will automatically adjust input voltage to match the Voltage DIP Switch setting. This will cause constant, unnecessary wear on the UPS.

Note: The Voltage DIP Switches must be set with the UPS turned OFF and disconnected from utility power. If the switches are set while the UPS is connected to utility power, the setting will not take effect.

Accessory Slot: Remove the small cover panel from this slot to install option- al accessories to remotely monitor and control your UPS. Refer to your acces- sory’s manual for installation instructions. Contact Tripp Lite Customer Support at (773) 869-1234 for more information, including a list of available SNMP, network management and connectivity products.

Input Breaker (SMX1500SLT): Protect your electrical circuit from overcur- rent draw from the UPS load. If this breaker trips, remove some of the load, then reset by pressing the breaker in.

Fan: The fan cools the UPS's internal components. It operates only when the UPS is in battery backup mode, is charging its batteries or is carrying a heavy electrical load.

SMX1050SLT, SMX1500SLT, SMX750SLT specifications

Tripp Lite is a well-known name in the realm of power protection and management, and the SMX series of line-interactive UPS systems stands out as a focal point of their offerings. The SMX1050SLT, SMX750SLT, and SMX1500SLT models are designed to meet varying power demands while ensuring high levels of reliability. These UPS systems are ideal for protecting sensitive electronic equipment in home or office settings.

One of the main features of the SMX series is its line-interactive technology, which provides a seamless transfer to battery power during outages and offers voltage regulation during brownouts or surges. This technology helps maintain a clean and stable power supply, crucial for sensitive devices such as computers, networking equipment, and servers.

The SMX750SLT model, with a capacity of 750VA, is suitable for smaller setups, offering enough power for entry-level servers or workstations. Meanwhile, the SMX1050SLT boasts a capacity of 1050VA, making it an excellent choice for mid-range applications, effectively supporting more extensive equipment setups.

The SMX1500SLT is the heavyweight of the trio, featuring a capacity of 1500VA. This model can support larger infrastructures, safeguarding critical equipment like advanced servers and telecommunications systems. All models in the SMX series come with multiple outlets, allowing users to connect several devices without compromising on performance.

Additionally, each unit features advanced management capabilities. The USB port and serial connectivity enable communication with connected devices, allowing for remote monitoring and management through Tripp Lite’s software. This feature enhances the user experience by providing real-time data about power consumption and battery status.

Another noteworthy characteristic is the built-in LCD display that provides vital information regarding battery load, remaining runtime, voltage levels, and more, making it easier for users to manage their power needs.

Furthermore, the SMX series incorporates hot-swappable battery design, allowing users to replace batteries without shutting down connected equipment, thereby minimizing downtime and enhancing productivity.

Overall, Tripp Lite’s SMX1050SLT, SMX750SLT, and SMX1500SLT UPS systems represent a robust solution for anyone looking to protect their equipment against power disturbances. Whether for personal use, small offices, or larger networks, these UPS units offer peace of mind with advanced features tailored to varied power requirements.