Tripp Lite SMX1050SLT, SMX750SLT, SMX1500SLT Carefully pull the front panel away from the UPS

Page 8

Battery Replacement

Battery Replacement Door: Under normal conditions, the original battery in your UPS will last several years. Battery replacement should be performed only by qualified service personnel. Refer to “Battery Warnings” in the Safety section. Should your UPS require battery

replacement, visit Tripp Lite on the Web at www.tripplite.com/support/bat- tery/index.cfm to locate the specific replacement battery for your UPS.

1 Carefully pull the front panel away from the UPS.

1

Place front panel on top of the unit. Remove the battery support bar.

2Remove old batteries.

Carefully pull the batteries from the UPS and disconnect them.

3Connect new batteries.

Connect the new batteries in exactly the same manner as the old ones: pos- itive (red) connectors together and negative (black) connectors together. Carefully push batteries back into the UPS.

4Reassemble UPS.

Reinstall the battery support bar and replace the front panel.

2

3

Storage and Service

Storage

Before storing your UPS, turn it completely OFF: with the UPS ON and receiving utility power, press and hold the “ON/OFF/STANDBY” button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPS for an extended period of time, recharge the UPS batteries once every three months: plug the UPS into a wall outlet; allow it to charge for 12 hours; and then unplug it and place it back in storage. Note: after you plug the UPS in, it will automatically begin charging its batteries; however, it will not sup- ply power to its outlets (see Quick Installation section). If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

Before returning your UPS for service, follow these steps:

1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions. Also, check that the UPS System’s circuit breaker(s) are not tripped. This is the most common cause of service inquiries which can be easily remedied by following the resetting instructions in this manual.

2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.

3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. If you require packaging, the technician can arrange to send you proper packaging. Securely pack the UPS to avoid damage during ship- ping. Do not use Styrofoam beads for packaging. Any damages (direct, indirect, special, inci- dental or consequential) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured car- rier to the address given to you by the Tripp Lite service technician.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

This product designed and engineered in the USA.

Note on Labeling

Two symbols are used on the label. V~ : AC Voltage

V : DC Voltage

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SmartPro SLT Important Safety Instructions Turn the UPS on USB and RS-232 Serial Communications Buttons Front Panel Indicator Lights Front Panel Other UPS Features Rear Panel Carefully pull the front panel away from the UPS USA 773.869.1212 International
Related manuals
Manual 5 pages 51.77 Kb

SMX1050SLT, SMX1500SLT, SMX750SLT specifications

Tripp Lite is a well-known name in the realm of power protection and management, and the SMX series of line-interactive UPS systems stands out as a focal point of their offerings. The SMX1050SLT, SMX750SLT, and SMX1500SLT models are designed to meet varying power demands while ensuring high levels of reliability. These UPS systems are ideal for protecting sensitive electronic equipment in home or office settings.

One of the main features of the SMX series is its line-interactive technology, which provides a seamless transfer to battery power during outages and offers voltage regulation during brownouts or surges. This technology helps maintain a clean and stable power supply, crucial for sensitive devices such as computers, networking equipment, and servers.

The SMX750SLT model, with a capacity of 750VA, is suitable for smaller setups, offering enough power for entry-level servers or workstations. Meanwhile, the SMX1050SLT boasts a capacity of 1050VA, making it an excellent choice for mid-range applications, effectively supporting more extensive equipment setups.

The SMX1500SLT is the heavyweight of the trio, featuring a capacity of 1500VA. This model can support larger infrastructures, safeguarding critical equipment like advanced servers and telecommunications systems. All models in the SMX series come with multiple outlets, allowing users to connect several devices without compromising on performance.

Additionally, each unit features advanced management capabilities. The USB port and serial connectivity enable communication with connected devices, allowing for remote monitoring and management through Tripp Lite’s software. This feature enhances the user experience by providing real-time data about power consumption and battery status.

Another noteworthy characteristic is the built-in LCD display that provides vital information regarding battery load, remaining runtime, voltage levels, and more, making it easier for users to manage their power needs.

Furthermore, the SMX series incorporates hot-swappable battery design, allowing users to replace batteries without shutting down connected equipment, thereby minimizing downtime and enhancing productivity.

Overall, Tripp Lite’s SMX1050SLT, SMX750SLT, and SMX1500SLT UPS systems represent a robust solution for anyone looking to protect their equipment against power disturbances. Whether for personal use, small offices, or larger networks, these UPS units offer peace of mind with advanced features tailored to varied power requirements.
Top Page Image Contents