Full load runtime (minutes)
Half load runtime (minutes)
DC system voltage (VDC)
Battery recharge rate (included batteries)
Replacement battery cartridge (internal UPS battery replacement)
4.5min. (1920w)
12 min. (960w)
48
Less than 4.5 hours from 10% to 90%
Battery Access
Battery replacement description
Front panel battery access door
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Undervoltage correction
Severe undervoltage correction
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Input voltages between 127 and 145 are reduced by 12%
Input voltages between 108 and 96 are boosted by 12%
Input voltages between 83 and 95 are boosted by 24%
LEDS ALARMS & SWITCHES
Front panel LCD display
Alarms
Alarm cancel operation
Switches
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Audible alarm indicates UPS startup,
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
UPS AC suppression response time
EMI / RFI AC noise suppression
PHYSICAL
570
Instantaneous
Yes
Installation form factors supported with included accessories
4 post 19 inch rackmount (mounting rail kit included)
Installation form factors supported with optional accessories
2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower
Primary form factor
Rackmount