Operating Instructions
2.17Buffering or Transferring Images by Alarm Signal
The Trigger page allows you to enable image buffer/transfer by
Notes
•If you are recording images to the SD memory card, refresh interval slows down.
•You need to attach the alarm to this product when using this feature.
1.Click [Trigger] on the Setup page.
2.Click No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Alarm] for trigger, select [Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and click [Next>].
Notes
•If you click [Save], all buffered images on the SD memory card are deleted.
•Click [Delete Buffered Images] to delete this buffered images.
•Click [Save] to save the settings.
•Clicking [Cancel] takes you back to the Trigger page without saving changes.
[For assistance, please call: | 91 |
