Operating Instructions
2.18Buffering or Transferring Images by Motion Detection Signal
The Trigger page allows you to enable image buffer/transfer by
Notes
•A change due to light or wind may detect motions mistakenly.
•Motion detection level is changed depending on resolution, image quality, and object situation. Confirm the level by performing motion detection recording.
•Enabling Motion Detection delays the frame rate of this product.
•Objects moving fast may not be detected.
•Motion Detection may not work in the dark.
1.Click [Trigger] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Motion Detection] for trigger, and click [Next>].
Notes
•If you click [Save], all buffered images on the SD memory card are deleted.
•Click [Delete Buffered Images] to delete this buffered images.
•Click [Save] to save the settings.
•Clicking [Cancel] takes you back to the Trigger page without saving changes.
102
