Operating Instructions
6.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, this product may not record the numbers of images as you set. In this case, set the image buffer frequencies longer.
•Clicking [Cancel] takes you back to the Trigger page without saving changes.
•Clicking [<Back] takes you back to the previous page.
Setting | Description |
|
|
Enable Pre- | • Check the box to enable the setting. This product buffers or |
trigger Image | transfers the image right before the motion detection signal |
Buffer | is detected. |
| • Set an interval, number of images to buffer and total |
| number. The buffered images may not match the total |
| number due to memory capacity, image resolution, image |
| quality or what object you view. |
|
|
Enable Post- | • Check the box to enable the setting. This product buffers or |
trigger Image | transfers the image right after the motion detection signal |
Buffer | is detected. |
| • Set an interval, number of images to buffer and total |
| number. The buffered images may not match the total |
| number due to memory capacity, image resolution, image |
| quality or what object you view. |
|
|
[For assistance, please call: | 105 |
