Operating Instructions
Setting | Description |
|
|
Default Gateway*1 | • If you have the assigned Default Gateway address by your |
(Static/DHCP Only) | ISP or network administrator, enter it in this data field. |
| • Set 4 digits |
| "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are |
| not available. |
|
|
DNS Server | • DNS server address is required in the following conditions. |
Address*1 | – Transferring images by |
(Static/DHCP Only) | – Setting products by their host names on the Multi- |
| Camera Setup page |
| – Using the DynamicDNS service |
| – Using the alarm log notification |
| • If you have the assigned DNS server addresses by your |
| ISP or network administrator, enter them in this data field. |
| They usually have two addresses. |
| • Set 4 digits |
| "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are |
| not available. |
|
|
Max. Bandwidth | • The bandwidth can be restricted. |
Usage | • Select the maximum bandwidth usage from [Unlimited] to |
| [0.1 Mbps]. |
| • This setting is valid in both IPv4/IPv6. |
|
| Note |
|
|
| Set the maximum bandwidth usage seeing the following | |
|
| file sizes. These are examples for a JPEG file with a | |
|
| standard image quality. File sizes may change depending | |
|
| on the image quality or how bright the object is. | |
|
| 160 | × 120 pixels: About 3.5 KB (28 Kbit) |
|
| 320 | × 240 pixels: About 10 KB (80 Kbit) |
|
| 640 | × 480 pixels: About 18 KB (144 Kbit) |
|
| ||
Connection Type | • Select [Auto Negotiation] normally. If you cannot access | ||
|
| this product, see page 7 of the Troubleshooting on the | |
|
| Setup | |
|
| • This setting is valid in both IPv4/IPv6. | |
|
| ||
*1 | If you automatically obtain the IP address from the DHCP server, you do not need to set it. | ||
40
