Operating Instructions
2.29 Controlling External Output Terminal
The digital output terminal allows you to control the external devices. You can change the initial status of the output signal.
Note
Connect the external devices to this product.
1.Click [External Output] on the Setup page.
2.Click [Save] when finished.
•Clicking [Cancel] cancels your settings without saving changes.
•New settings are saved.
•When finished, "Success!" is displayed.
Setting |
| Description |
|
|
|
External Device | • | If you check [Open], the internal transistor turns off and the |
Control Output |
| external output terminal gets high impedance (open |
|
| collector) when this product powers up. If you check [Short |
|
| to GND], the internal transistor turns on and is electrically |
|
| |
|
| The external output terminal gets low impedance (0 V). |
|
|
|
Button name | • | You can change the output control button names on the |
modification |
| operation bar. You can name the button depending on your |
|
| external devices. |
|
|
|
3.Click [Go to External Output Control page].
• The External Output Control page is displayed.
130
