
Operating Instructions |
| |
2.16 | Buffering or Transferring Images by Timer | 82 |
2.17 | Buffering or Transferring Images by Alarm Signal | 91 |
2.18 | Buffering or Transferring Images by Motion Detection Signal .... | 102 |
2.19 | Formatting the SD memory card | 113 |
2.20 | Stopping the SD Memory Recording | 114 |
2.21 | Starting the SD Memory Recording | 115 |
2.22 | Transfer the Image in Transport Mode | 116 |
2.23 | Transfer the Image in Tunnel Mode | 117 |
2.24 | Setting the Motion Detection | 118 |
2.25 | Notifying Setup of an Alarm Log | 121 |
2.26Changing Initial Settings on the Single Camera page or the Multi-
| Camera page | 123 |
2.27 | Configuring Multiple Images | 126 |
2.28 | Specifying Operation Time | 128 |
2.29 Controlling External Output Terminal | 130 | |
2.30 | Changing Indicator Display | 131 |
3 | Maintenance | 132 |
3.1 | Maintenance page | 132 |
3.1.1 | Confirming the Status | 133 |
3.1.2 | Confirming Session Status | 133 |
3.1.3 | Displaying Alarm Logs | 134 |
3.1.4 | Restarting this Product | 134 |
3.1.5 Updating this Product Firmware | 135 | |
3.1.6 | Creating Configuration File | 138 |
3.1.7 Loading Settings from a Configuration File | 139 | |
3.1.8 Resetting this Product to Factory Default | 140 | |
3.2 | Support page | 141 |
3.2.1 | Seeing Help page | 141 |
3.2.2 | Seeing Product Information | 141 |
3.2.3 | Seeing Support Information | 142 |
3.3 | External I/O | 143 |
3.4 | FACTORY DEFAULT RESET Button | 145 |
3.5 | Default Setting List | 146 |
3.6 | Setting an IP Address on Your PC | 154 |
8