
Operating Instructions
| IKE Items | Settings | |
|
|
|
|
Phase 2 |
| Mode | Quick mode |
|
|
|
|
|
| PFS | Specifies either of Off, |
|
|
| H Group 2. |
|
|
|
|
|
| Cipher Algorithm | Select from |
|
|
| |
|
|
| (Multiple selections are available.) |
|
|
|
|
|
| ||
|
| Algorithm | (Multiple selections are available.) |
|
|
|
|
|
| Lifetime | Specifies by 28800 s (Byte setting is not |
|
|
| supported.) |
|
|
|
|
*1 | This product does not support aggressive mode. |
•Set up the IPsec policy as shown below.
Items | Settings |
|
|
Protocol | ANY |
|
|
Source Network | Network address and subnet mask on the LAN side of the |
| VPN router |
|
|
Source IP address | A global address on the WAN side of the VPN router |
|
|
Destination Network | A global address of camera server |
|
|
Destination IP address | A global address of camera server |
|
|
9.Access this product (see page 12).
• If you can access this product, the IPsec setup is complete.
Notes
•In IPsec communications, "IPsec" is displayed on the Top page or the Single Camera page.
•If you cannot communicate using IPsec, see page 20 of the Troubleshooting on the Setup
•See the Panasonic support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec features.
54