Panasonic BB-HCS301A manual Alarm log operation can be set here

Operating Instructions

Setting	Description
A setup of operation	• Alarm log operation can be set here.
Time	• Set the date and time to send alarm logs via E-mail.
SMTP Server IP	• If you set the server IP address, set 4 digits (0—255)
Address or Host	and 3 periods such as "192.168.0.253". But "0.0.0.0"
Name*1	and "255.255.255.255" are not available. Or set a host
	name (0—255 characters).
	• An IPv6 address can be set.
Port No.	• Enter a number (1—65535). Usually set to 25.
POP3 Server IP	• If you set the server IP address, set 4 digits (0—255)
Address or Host	and 3 periods such as "192.168.0.253". But "0.0.0.0"
Name*1	and "255.255.255.255" are not available. Or set a host
	name (0—255 characters).
	• An IPv6 address can be set.
Port No.	• Enter a number (1—65535). Usually set to 110.
Login ID*2	• If your ISP requires a login ID to log in to a POP3
	server, set it (0—63 characters).
Password*2	• If your ISP requires a password to log in to a POP3
	server, set it (0—63 characters).
Reply E-mail	• Set the sender's E-mail address. We recommend you
Address*2	to set the administrator's E-mail address.
Destination E-mail	• Set the destination E-mail address (up to 3).
Address 1-3*2
Subject*2	• Enter a subject with ASCII characters (see page 163)
	or characters in each language (0—44 characters for a
	1-byte character and 0—22 characters for a 2-byte
	character).

*1

*2

But [Space], ["], ['], [&], [<] and [>] are not available. But ["] is not available.

122