Operating Instructions
Basic
(1)Network (IPv4) Configures the IPv4 network settings to connect this product to the network (see page 37).
(2)Network (IPv6) Configures the IPv6 network settings to connect this product to the network (see page 41).
(3) | IPsec | Enables IPsec (Transport or Tunnel mode) (see page 45). |
(4) | UPnP | Enables automatic port forwarding or shortcut to this |
|
| product (see page 55). |
(5)DynamicDNS Registers with the DynamicDNS service (see page 58).
(6)Date and Time Sets the date and time, automatic time adjustment and adjust clock for daylight saving time settings (see page 64).
(7) | Camera | Sets camera name, Vertical Resolution and Picture position |
|
| adjustment (see page 67). |
(8) | Audio | Sets output, volume, PC audio input timeout, input, |
|
| sensitivity and mute (see page 69). |
|
| |
Account |
| |
(9) | Administrator*1 | Sets authentication setting and administrator security (user |
|
| name and password) (see page 74). |
(10) | General User*1 | Sets general user security (user name and password) and |
|
| general user's access level (see page 78). |
|
| |
Buffer/Transfer |
| |
(11) | Trigger | Sets image buffer, transfer by timer, alarm or motion |
|
| detection. (See page 82, page 91 or page 102) |
(12) | Motion | Sets the threshold and the sensitivity (see page 118). |
| Detection |
|
(13)Alarm Log Sets the alarm log destination (see page 121).
[For assistance, please call: | 35 |
