Operating Instructions
2.25 Notifying Setup of an Alarm Log
Once a day, an alarm log sent at a specified time can be checked. To enable Alarm Log, set Alarm or Motion Detection for Trigger Setting and check [Enable].
1.Click [Alarm Log] on the Setup page.
2.Set each parameter.
3.Click [Save] to save the settings.
•Clicking [Cancel] cancels your settings without saving changes.
4.Click [Go to Alarm Log page].
•The Alarm Log page is displayed.
Note
If you change a setup of operation and click [Save], new alarm logs are deleted.
[For assistance, please call: | 121 |
