Panasonic BB-HCS301A manual Setting Description

	Operating Instructions
Setting	Description
Display	• Check the box to enable the image display.
IP Address*1 or	• Set the IP address or the host name to enable the image
Host Name*2	display.
Port No.	• Set the port number (1—65535).
Camera Name*3	• The name is displayed only on the Multi-Camera page.

*1

*2

*3

In IPv4, set 4 digits (0—255) and 3 periods such as "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are not available.

In IPv6, set the host name.

Enter ASCII characters for the host name (see page 163). But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<] and [>] are not available.

Enter 1—255 characters.

Enter ASCII characters (see page 163) or characters in each language (1—15 characters for a 1-byte character and 1—7 characters for a 2-byte character). But [Space], ["], ['], [#], [&], [%], [=], [+], [?], [:], [<], and [>] are not available.

Notes

•Set the local IP address and port number for this product on the same LAN.

•If this product is accessed from the Internet, be sure to use the global IP address. In this situation, local IP addresses such as

192.168.. cannot be used.

4.Click [Save] when finished.

•New settings are saved.

•The Multi-Camera Setup page is displayed.

[For assistance, please call: 1-800-272-7033] 127