Operating Instructions
1 Camera Monitoring
1.1Product Feature Locations
Front View
Power Indicator
The color display shows this product's status.
SD Memory Card Slot Insert the SD Memory card.
(see page 165)
FACTORY DEFAULT RESET Button Pushing the button resets this product to factory default.
(see page 145)
Indicator Display
| Status | Indicator Operation |
| ||||||||
Power | Not on the LAN | Orange blinking |
| ||||||||
on | On the LAN | Orange blinking |
| Green blinking |
|
| Green | ||||
|
| ||||||||||
Normal Operation*1 |
|
| Green |
|
|
|
| ||||
Automatic | Setting | Green blinking |
| ||||||||
Setup | Finished setting | Green blinking |
|
| Green |
| |||||
|
| ||||||||||
Using | Getting IP address*2 | Green blinking |
| ||||||||
DHCP | Got IP address |
|
| Green |
|
|
|
| |||
Updating Firmware | Orange blinking |
| |||||||||
Pressing FACTORY | Orange blinking |
|
| Turning off |
| ||||||
|
|
| |||||||||
DEFAULT RESET button | (This product restarts after that.) |
| |||||||||
UPnPTM Failure | Orange blinking (About a | ||||||||||
Internal Failure | Red blinking*3 |
| |||||||||
*1 The indicator turns orange if this product is not connected to the LAN. *2 The indicator blinks orange if this product is not connected to the LAN. *3 See page 4 of the Troubleshooting on the Setup
10
