|
| Operating Instructions |
|
|
|
| Setting | Description |
|
|
|
| Time Setting | • Select date and format (AM/PM or 24 H). These settings |
|
| are used for each images (Single, Multi and Buffered), |
|
| Trigger, Alarm Log and Operation Time. But |
|
| and file name by |
|
| format. |
|
|
|
| Automatic Time | • NTP (Network Time Protocol) server synchronizes this |
| Adjustment | product's internal clock. It adjusts automatically every day. |
|
| Check the box to enable it. |
|
| • Set the NTP server IP address. In IPv4, set 4 digits (0— |
|
| 255) and 3 periods such as "192.168.0.253". But "0.0.0.0" |
|
| and "255.255.255.255" are not available. In IPv6, set 8 |
|
| hexadecimal digits divided with ":". Consecutive 0s can be |
|
| abbreviated as "::". Or set a host name*1 |
|
| characters). |
|
| • Select your time zone. |
|
| Note |
|
| This product will not synchronize to the NTP server if the |
|
| time setting from the NTP server moves forward or |
|
| backward more than 1 hour at a time. This is to protect this |
|
| product's time setting from fraudulent NTP server |
|
| tampering, incorrect time information, etc. |
|
|
|
| Adjust Clock for | • During the daylight saving time, the internal clock is turned |
| Daylight Saving | forward an hour. The clock will shift one hour forward at the |
| Time | set time on the Start Day, and move back one hour at the |
|
| set time on the End Day. Check the box to enable it. |
|
| Note |
|
| An "s" is put between date and time of time stamp when |
|
| enabling this feature. The time stamp will be attached to |
|
| the transferred images by the Image Transfer feature. |
|
|
|
*1 | But [Space], ["], ['], [&], [<] and [>] are not available. |
3.Click [Save] when finished.
•New settings are saved.
•When finished, "Success!" is displayed.
4.Click [Go to Date and Time page].
•The Date and Time page is displayed.
[For assistance, please call: | 65 |
