That GND pin and pin 1 or pin is left open

Setting	Description

Enable Image	• Check the box to enable the Trigger setting. Clear the box
Buffer/Transfer	to disable it.

Trigger	• Selecting [Timer] enables this product to buffer/transfer the
	image by timer.
	• Selecting [Alarm] enables this product to buffer/transfer the
	image by alarm signal.
	• Selecting [Motion Detection] enables this product to
	capture/transfer the images when the motion detects
	something.

Alarm enable	• Selecting the method of the detection for an alarm
condition	connected to the External I/O terminal.
	• Select [Rising: GND to Open (High).] or [Falling: Open
	(High) to GND.]. [Rising: GND to Open (High).] is the state
	that GND pin and pin 1 or pin is left open.
	[Falling: Open (High) to GND.] is the state that GND pin
	and pin 1 or pin is short-circuited. (See page 143)

4.Set the time, and click [Next>].

Note

The timer works by an internal clock. Set the date and time before using timer buffer/transfer (see page 64).

•Clicking [<Back] takes you back to the previous page.

•Clicking [Cancel] takes you back to the Trigger page without saving changes.

Setting	Description

A day of the	• Check the box to enable the day. Clear the box to disable it.
week

Active Time of	• Select the [Always] option when you do not specify the time
Trigger	period. If you specify the time period, select the time period
	option and set the time period.

Panasonic BB-HCS301A manual That GND pin and pin 1 or pin is left open