Operating Instructions
2.24 Setting the Motion Detection
The Motion Detection page allows you to adjust sensitivity of the Motion Detection. Threshold: If the threshold is set low, this function sensitively detects changes. Sensitivity: If you set sensitivity high, amplitude on the motion detection bar gets jumpy.
1.Click [Motion Detection] on the Setup page.
2.Click the Motion Detection bar in Threshold to set the threshold level.
3.Click the Motion Detection bar in Sensitivity to set the sensitivity level.
4.Click [Save] to save the settings.
•Clicking [Cancel] cancels your settings without saving changes.
5.Click [Go to Motion Detection page].
•The Motion Detection page is displayed.
Setting |
| Description |
|
|
|
Threshold | • | Adjust the threshold for Motion Detection. Setting the |
|
| threshold lower allows subtler changes to be detected. |
|
|
|
Sensitivity | • | If you set sensitivity high, amplitude on the motion |
|
| detection bar gets jumpy. |
|
|
|
118
