Nortel Networks 114200-E Isdn BRI Adapter Module Requirements, Table D-13 Isdn Connector Pinouts

Installing and Operating Passport ARN Routers

ISDN BRI Adapter Module Requirements

The ISDN BRI adapter module (Order No. CV0004002) is approved only for installation in a host, and with host attachments, which are either type approved for such apparatus or, if supplied after 1st March 1989, are marked with or supplied with a statement that the host is supplied under the terms of BABT General Approval Number NS/G/1234/J/100003.

Installation of the ISDN BRI module in any Passport ARN chassis (Order Nos. CV1001001, CV1001002, CV1001003, CV1001004, CV1001005, CV1001011, CV1001020, CV1101001, CV1101002, CV1101003, CV1101004, CV1101005) complies with all requirements listed in this section. Installation of the ISDN BRI upgrade module in any ARN complies with all requirements listed in this section.

Table D-12 lists the safety status of interconnection points to the connection of other equipment.

Table D-12.	ISDN BRI Safety Status (Order No. CV0004002)
Port Location		Port Description	Type of Circuit
ISDN		BRI ISDN	TNV at SELV levels
P6		Host Port	SELV

Table D-13 lists the ISDN connector pinouts.

Table D-13.	ISDN Connector Pinouts
Pin	Signal
1	No connection
2	No connection
3	Tx+
4	Rx+
5	Rx-
6	Tx-
7	No connection
8	No connection

D-12 114200-E Rev 00