Nortel Networks 114200-E Table B-2 Quick-Start Commands, Task Action Details, Press Control-c

Using Local Boot (the Quick-Start Procedure)

5.Type the following command and press the Return key: run inst_arn.bat

6.Follow the script online, using your worksheets when responding to its prompts.

The list of commands in Table B-2 describe how to interact with the Quick-Start script.

Table B-2.	Quick-Start Commands
Task		Action	Details
Accept a default value		Press Return	Your console displays default values in
			brackets; for example, [E11].
Repeat a step (for		Press Control-c	When prompted, “Terminate script y/n?”
example, if you make a		Press n	press the n key. You return to the
mistake)			beginning of the step so that you can
			reenter the information.
Stop the Quick-Start		Press Control-c	When prompted, “Terminate script y/n?”
installation procedure		Press y	press the y key. The procedure is
			terminated and you return to the
			Technician Interface prompt.
			To restart the Quick-Start/Power-Start
			procedure, you must reboot the router by
			entering boot.

The script prompts you for the following information (in the order given):

a.The initial Global Worksheet information

b.Specific protocol information

c.Wide area protocol selection

d.Specific protocol information

e.The rest of the Global Worksheet information

After you enter all of the Global Worksheet protocol information, the script displays a Configuration Summary and prompts you to save the configuration to a file.

114200-E Rev 00 B-17